- Home
- Industries
- Labels, nameplates and packaging
Industry · 8 applications
Screen printing machines for labels, nameplates and packaging
Labels, nameplates and packaging work covers vehicle decals and graphics, labels and stickers, nameplates and metal labels, spot uv and special effects, security printing, plastic cards, ceramic decals, signs and pos graphics. Two-wheeler and vehicle graphics are printed in long runs on self-adhesive vinyl, in several colours plus a clear coat. Product, warning and rating labels are printed on self-adhesive films in sheets or on the reel.
Applications
Each page shows the material, what the job needs, and a typical Sunstar line.
All applications →
Vehicle decals and graphics
Two-wheeler and vehicle graphics are printed in long runs on self-adhesive vinyl, in several colours plus a clear coat.
See the line →Labels, nameplates and packaging
Labels and stickers
Product, warning and rating labels are printed on self-adhesive films in sheets or on the reel.
See the line →Labels, nameplates and packaging · Plastic and metal parts
Nameplates and metal labels
Nameplates are printed on anodised aluminium, stainless steel and polycarbonate.
See the line →Labels, nameplates and packaging
Spot UV and special effects
Spot UV, texture, glitter and raised effects are screen printed onto offset-printed sheets.
See the line →Labels, nameplates and packaging
Security printing
Security features such as colour-shifting ink, tactile marks and scratch-off panels are screen printed, because they need a thick, exact ink film.
See the line →Labels, nameplates and packaging
Plastic cards
Plastic, bank and ID cards are typically made of four laminated layers of PVC.
See the line →Labels, nameplates and packaging
Ceramic decals
Ceramic decals are screen printed on transfer paper in many solid colours, in very close registration.
See the line →Labels, nameplates and packaging
Signs and POS graphics
Signs, displays and point-of-sale graphics are printed in large formats on rigid and flexible sheet.
See the line →Machines used most
Counted across the typical lines for labels, nameplates and packaging applications.
All machines →







Guides
Linked from the applications above.
All guides →Flatbed vs cylinder screen printing machine
Choose a flatbed if you print rigid or thick material, or mixed jobs in short and medium runs at around 500 sheets an hour. Choose a stop-cylinder press if you print thin flexible sheets in long runs and need 1,800 to 4,000 sheets an hour. Many plants run both.
Read →GuideHow to choose an industrial screen printing machine
Five facts about your job decide the machine: the material and its thickness, the print size, the output you need per hour, the register tolerance and the ink. With these in hand, the choice between a flatbed, a cylinder press, a roll-to-roll press or a purpose-built printer is usually clear.
Read →GuideUV ink not curing
UV ink that stays tacky, scratches off or fails a tape test has usually received too little UV energy for its film thickness and colour. Measure the UV dose on the belt with a radiometer, in mJ/cm², and compare it with the figure in the ink maker's data sheet. The common causes are an aged lamp, dirty reflectors, a belt running too fast and an ink film that is too thick.
Read →GuideSemi-automatic vs fully automatic screen printing machine
A semi-automatic screen printing machine prints by itself, but an operator loads and removes each sheet. A fully automatic machine also feeds, registers and delivers the sheet to the dryer. Semi-automatic suits short runs and many job changes. Fully automatic suits steady volume, where output and consistency repay the higher cost.
Read →GuideImported vs Indian screen printing machine
A lower-cost Indian-made screen printing machine is a sensible choice for simple graphics, wide tolerances, short runs and a tight budget. A precision imported press earns its cost on multi-layer and functional work, tight register and high volume, where rejects are expensive. The tolerance of your part and the cost of a rejected sheet decide it.
Read →GuideScreen printing vs digital printing for industrial parts
Screen printing is the better process for volume production, for thick or opaque ink films and for functional inks such as silver, carbon and glass enamel. Digital printing is better for short runs, many design versions and variable data. It is common to use digital for samples and screen printing for production.
Read →Questions buyers ask
Which machine is best for decal printing in volume?
A stop-cylinder press such as the SPS VTS SL-71, which prints up to 4,000 sheets an hour and delivers straight into the dryer.
Sheet or reel for labels?
Sheets suit mixed sizes and shorter runs. Reels suit steady volume and feed straight into die-cutting.
Which machine prints aluminium nameplates?
An electric flatbed such as the ATMA AT-60PPD or AT-80P, which takes rigid sheet up to 25 mm thick.
Why screen print spot UV?
A screen deposits a much thicker varnish film than offset or flexo, which gives the high-gloss, raised look.
Which press is used for security features?
SPS stop-cylinder presses, which are specified for card and document work with camera registration.
Inquiry
Tell Sunstar what you print.
An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.
