- Home
- Industries
- Glass and solar
Industry · 4 applications
Screen printing machines for glass and solar
Glass and solar work covers touch panels and cover glass, appliance glass, architectural and automotive glass, solar cells and pv glass. Cover glass gets a printed border in black or white, with windows for cameras and sensors. Refrigerator doors, oven doors and hob tops are printed direct onto glass, edge to edge, before tempering.
Applications
Each page shows the material, what the job needs, and a typical Sunstar line.
All applications →
Touch panels and cover glass
Cover glass gets a printed border in black or white, with windows for cameras and sensors.
See the line →Glass and solar
Appliance glass
Refrigerator doors, oven doors and hob tops are printed direct onto glass, edge to edge, before tempering.
See the line →Glass and solar · Automotive
Architectural and automotive glass
Architectural panels and automotive glass are printed with ceramic ink: black bands, dot fades and heater lines.
See the line →Glass and solar
Solar cells and PV glass
Solar manufacturing uses screen printing for fine silver lines on cells and for coatings on module glass.
See the line →Machines used most
Counted across the typical lines for glass and solar applications.
All machines →







Guides
Linked from the applications above.
All guides →Screen printing defects
Most screen printing defects come from the screen, the squeegee, the ink or the off-contact setting. The table below gives the usual cause and fix for pinholes, sawtooth edges, bleeding, smudging, moiré and uneven deposit. Change one setting at a time and keep a record of what worked.
Read →GuideHow to choose an industrial screen printing machine
Five facts about your job decide the machine: the material and its thickness, the print size, the output you need per hour, the register tolerance and the ink. With these in hand, the choice between a flatbed, a cylinder press, a roll-to-roll press or a purpose-built printer is usually clear.
Read →GuideScreen printing vs digital printing for industrial parts
Screen printing is the better process for volume production, for thick or opaque ink films and for functional inks such as silver, carbon and glass enamel. Digital printing is better for short runs, many design versions and variable data. It is common to use digital for samples and screen printing for production.
Read →GuideScreen tension in N/cm
Screen tension is the pulling force in the stretched mesh, measured in newtons per centimetre (N/cm) with a tension meter resting on the mesh. Most polyester screens for industrial work run at about 16 to 30 N/cm. The right figure depends on the mesh count and thread diameter, and the mesh maker's data sheet gives it for each mesh.
Read →GuideEmulsion thickness (EOM)
EOM, or emulsion over mesh, is the thickness of emulsion that stands beyond the mesh on the print side of the screen. For fine lines and halftones it is typically 3 to 8 microns, or about 10 to 20 percent of the mesh thickness. EOM is set by how the screen is coated: the number of coats, the side they are applied from, the coating speed and the trough.
Read →From Sunstar Academy
Real footage and short lessons from Sunstar's own channel.
All videos →

Questions buyers ask
Can a standard flatbed print cover glass?
Cover glass needs camera alignment and a clean build. The ATMAOE optical-electronics series is made for it.
Which machine prints direct on refrigerator glass?
The ATMATIC GS and ATMALINE IG glass lines, which load, register, print and deliver glass panels to the dryer in line.
What size of glass can be printed?
ATMA glass lines cover print areas of 1200 × 2000 mm and larger. Sunstar confirms the model against your panel sizes.
Does Sunstar supply screen making for solar?
Yes. Grünig stretching and coating and SignTronic imaging are used where screen quality decides line width.
Inquiry
Tell Sunstar what you print.
An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.
