- Home
- Applications
- Medical device panels
Application · Medical and diagnostics · Plastic and metal parts
Medical device screen printing machine
Medical device panels and housings. Medical devices carry printed overlays, scales and markings on flat panels and moulded housings. Prints have to be legible, durable and traceable to a batch.
- Device overlays and control panels
- Scales and markings on housings
- Diagnostic cartridges
Polycarbonate, polyester and moulded plastics
- Sharp small text
- Durable inks
- Repeatable job settings
A typical Sunstar line
These machines are commonly specified together for this job. Sunstar confirms the final line against your material, print size and volume.
All machines →


The press is one part of the line. See all printers, pre-press, dryers, handling, squeegees.
From Sunstar Academy
Real footage and short lessons from Sunstar's own channel.
All videos →
ATMA OE MF44 | Automatic CCD Screen Printer for Printed Electronics
ATMA OE MF44 is an automatic CCD registering screen printer designed for precision applications in medical diagnostics and printed electronics.
Questions buyers ask
Can one press print flat panels and moulded parts?
Flat panels run on a flatbed. Moulded parts run on an index-table printer with part fixtures.
Also searched as
biomedical screen printing machine, healthcare printing machine, medical overlay printing, medical device printing machine, medical panel printing machine, medical equipment printing machine, medical printing machine
Machine types for this job
See every model in each class.
Operator-fed electric flatbeds and precision part printers
A semi-automatic screen printing machine prints each sheet by motor while an operator loads and unloads it.
See models →Machine typeFlat bed presses for rigid and flexible sheets up to 25 mm thick
A flatbed screen printing machine holds the sheet flat on a vacuum bed.
See models →Guides
Useful for this job.
All guides →How membrane switches are made
A membrane switch is made by screen printing a graphic overlay and one or two circuit layers on plastic film, then cutting them and laminating them with a spacer and adhesive. The circuit is printed in silver and carbon ink, with a dielectric layer for insulation. Each printed layer is dried or cured before the next, and each has to register to the others.
Read →GuideHow glucose test strips are screen printed
A glucose test strip is made by screen printing carbon and silver electrodes on plastic film, printing an insulation layer that leaves a small electrode area open, and adding the enzyme reagent. Many strips are printed side by side on one sheet or along a reel, then covered and cut apart. The electrode area sets the reading, so line width, ink deposit and register are held tightly.
Read →Related applications

IMD / in-mould decoration
IMD films are screen printed flat, then formed and back-moulded into a plastic part.
See the line →Medical and diagnostics
Glucose test strips
A test strip is several printed layers: carbon and silver electrodes, then insulation.
See the line →Labels, nameplates and packaging · Plastic and metal parts
Nameplates and metal labels
Nameplates are printed on anodised aluminium, stainless steel and polycarbonate.
See the line →Inquiry
Tell Sunstar what you print.
An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.
