- Home
- Industries
- Medical and diagnostics
Industry · 2 applications
Screen printing machines for medical and diagnostics
Medical and diagnostics work covers glucose test strips, medical device panels. A test strip is several printed layers: carbon and silver electrodes, then insulation. Medical devices carry printed overlays, scales and markings on flat panels and moulded housings.
Applications
Each page shows the material, what the job needs, and a typical Sunstar line.
All applications →
Glucose test strips
A test strip is several printed layers: carbon and silver electrodes, then insulation.
See the line →Medical and diagnostics · Plastic and metal parts
Medical device panels
Medical devices carry printed overlays, scales and markings on flat panels and moulded housings.
See the line →Machines used most
Counted across the typical lines for medical and diagnostics applications.
All machines →







Guides
Linked from the applications above.
All guides →How glucose test strips are screen printed
A glucose test strip is made by screen printing carbon and silver electrodes on plastic film, printing an insulation layer that leaves a small electrode area open, and adding the enzyme reagent. Many strips are printed side by side on one sheet or along a reel, then covered and cut apart. The electrode area sets the reading, so line width, ink deposit and register are held tightly.
Read →GuideMesh count for conductive ink
For silver and carbon conductive pastes on membrane switches and printed sensors, polyester mesh of about 61 to 90 threads per cm is typical. Finer tracks use polyester of 120 threads per cm or more, or stainless steel mesh of 325 to 400 threads per inch. Start with the mesh named in the paste maker's data sheet, because particle size and target resistance decide the choice.
Read →GuideCTS vs film positives
With film positives, the artwork is output on film, laid on the coated screen in a vacuum frame and exposed. Computer to screen (CTS) writes the artwork onto the coated screen with UV light, straight from the file. CTS removes the film, the vacuum frame and manual positioning. Film remains workable for a screen room that makes only a few simple screens a week.
Read →GuideHow membrane switches are made
A membrane switch is made by screen printing a graphic overlay and one or two circuit layers on plastic film, then cutting them and laminating them with a spacer and adhesive. The circuit is printed in silver and carbon ink, with a dielectric layer for insulation. Each printed layer is dried or cured before the next, and each has to register to the others.
Read →From Sunstar Academy
Real footage and short lessons from Sunstar's own channel.
All videos →
ATMA OE MF44 | Automatic CCD Screen Printer for Printed Electronics
ATMA OE MF44 is an automatic CCD registering screen printer designed for precision applications in medical diagnostics and printed electronics.
Questions buyers ask
Which machine prints glucose test strips?
Small-format fully automatic flatbeds such as the ATMA AT-45FA, or roll-to-roll presses such as the Lingtie LTA-4050 for continuous production.
Can one press print flat panels and moulded parts?
Flat panels run on a flatbed. Moulded parts run on an index-table printer with part fixtures.
Inquiry
Tell Sunstar what you print.
An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.
