- Home
- Industries
- Electronics
Industry · 5 applications
Screen printing machines for electronics
Electronics work covers membrane switches and overlays, flexible circuits (fpc), rigid pcbs, touch panels and cover glass, printed sensors and seat mats. A membrane switch has a printed graphic overlay and a printed circuit of silver and carbon ink. Flexible circuits are printed on thin film that stretches and moves.
Applications
Each page shows the material, what the job needs, and a typical Sunstar line.
All applications →
Membrane switches and overlays
A membrane switch has a printed graphic overlay and a printed circuit of silver and carbon ink.
See the line →Electronics
Flexible circuits (FPC)
Flexible circuits are printed on thin film that stretches and moves.
See the line →Electronics
Rigid PCBs
Rigid boards are screen printed with solder mask, legend, carbon and peelable mask.
See the line →Electronics · Glass and solar
Touch panels and cover glass
Cover glass gets a printed border in black or white, with windows for cameras and sensors.
See the line →Electronics · Automotive
Printed sensors and seat mats
Seat occupancy sensors, force sensors and printed heaters are functional prints.
See the line →Machines used most
Counted across the typical lines for electronics applications.
All machines →







Guides
Linked from the applications above.
All guides →Flatbed vs cylinder screen printing machine
Choose a flatbed if you print rigid or thick material, or mixed jobs in short and medium runs at around 500 sheets an hour. Choose a stop-cylinder press if you print thin flexible sheets in long runs and need 1,800 to 4,000 sheets an hour. Many plants run both.
Read →GuideHow to choose an industrial screen printing machine
Five facts about your job decide the machine: the material and its thickness, the print size, the output you need per hour, the register tolerance and the ink. With these in hand, the choice between a flatbed, a cylinder press, a roll-to-roll press or a purpose-built printer is usually clear.
Read →GuideImported vs Indian screen printing machine
A lower-cost Indian-made screen printing machine is a sensible choice for simple graphics, wide tolerances, short runs and a tight budget. A precision imported press earns its cost on multi-layer and functional work, tight register and high volume, where rejects are expensive. The tolerance of your part and the cost of a rejected sheet decide it.
Read →GuideScreen printing vs digital printing for industrial parts
Screen printing is the better process for volume production, for thick or opaque ink films and for functional inks such as silver, carbon and glass enamel. Digital printing is better for short runs, many design versions and variable data. It is common to use digital for samples and screen printing for production.
Read →GuideHow membrane switches are made
A membrane switch is made by screen printing a graphic overlay and one or two circuit layers on plastic film, then cutting them and laminating them with a spacer and adhesive. The circuit is printed in silver and carbon ink, with a dielectric layer for insulation. Each printed layer is dried or cured before the next, and each has to register to the others.
Read →GuideFine-line screen printing on polycarbonate
Fine lines on polycarbonate need four things to be right together: a fine mesh at high tension, a thin and flat stencil with a sharp image, a sharp squeegee at low pressure, and a clean, flat sheet free of static. Lines of around 100 to 150 microns are typically achievable on a well set flatbed press. Finer lines need closer control of every step.
Read →From Sunstar Academy
Real footage and short lessons from Sunstar's own channel.
All videos →
How Screen Printing Makes Electronic Circuits, Sensors & Membrane Switches
Did you know screen printing is used in electronics manufacturing, not just for printing graphics?
Questions buyers ask
Which screen printing machine is used for membrane switches?
Flatbed presses such as the ATMA ATMACE 67/G(6), AT-80P/SV and AT-120P, on polyester and polycarbonate.
Sheet-fed or roll-to-roll for FPC?
Sheet-fed flatbeds suit development and mixed work. Roll-to-roll suits steady volume, with no sheet handling between print and cure.
Which machine prints solder mask on PCBs?
The ATMAOE PC series and the in-line ATMALINE PC68-SM are built for solder mask and legend printing on rigid panels.
Can a standard flatbed print cover glass?
Cover glass needs camera alignment and a clean build. The ATMAOE optical-electronics series is made for it.
Why does the machine matter for printed sensors?
The electrical value of the part follows the ink thickness. A servo print stroke and a stable screen lift keep the deposit the same from sheet to sheet.
Inquiry
Tell Sunstar what you print.
An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.
