Skip to content
Sunstar Graphics Brochures

Industry · 6 applications

Screen printing machines for automotive

Automotive work covers dials and clusters, imd / in-mould decoration, vehicle decals and graphics, gaskets, printed sensors and seat mats, architectural and automotive glass. Dials and instrument cluster appliqués are printed in six to twelve layers on polycarbonate. IMD films are screen printed flat, then formed and back-moulded into a plastic part.

See the applications
02 · Machines

Machines used most

Counted across the typical lines for automotive applications.

All machines →
New
ATMA ATMACE 67/G(6)
ATMA3 of 6 jobsATMA ATMACE 67/G(6)Suitable for graphic or industrial printing onto rigid and flexible material flat substrate such as ceramic transfer paper, advertisement sticker or decal, package case for cigarette and liquor, UV varnish, membrane switch, automotive dashboard, etc.View →
RKS CARBON HT PK
RKS3 of 6 jobsRKS CARBON HT PKCarbon-fibre carrier combined with RKS high-performance HT polyurethane, with a plane-parallel sharp printing edge profiled on fully automatic machines, for SMT, head gaskets, 3D and similar precision printing.View →
ATMA AT-80P/SV
ATMA2 of 6 jobsATMA AT-80P/SVElectric Flat Screen Printer is suitable for printing Membrane Switch, Flexible PCB, Nameplate & Cards, etcindustrial products.View →
New
SignTronic STM-ONE
SignTronic2 of 6 jobsSignTronic STM-ONECompact CtS system for small to medium stencil volumes with an attractive entry price.View →
Luen Cheong SD5000
Luen Cheong2 of 6 jobsLuen Cheong SD5000This advanced IR Drying Tunnel is engineered to efficiently process thermosetting inks used in a variety of industrial applications.View →
SPS ASTRON QX 57
SPS2 of 6 jobsSPS ASTRON QX 57The newest generation of STOP cylinder screen printing machines is the SPS ASTRON QX range: an automatic 4-post press that is fully servo driven, with CCD camera image registration to an accuracy of 30 um or better.View →
Luen Cheong SD7000
Luen Cheong2 of 6 jobsLuen Cheong SD7000This conveyor dryer is widely used in the drying of screen printing industry, is especially suitable for solidifying heat-set and special type of printing ink.View →
Grünig G-STRETCH 281
Grünig1 of 6 jobsGrünig G-STRETCH 281The G-STRETCH 281 BASIC enables you to reduce mesh costs, to stretch with utmost speed and flexibility while keeping expenses under control.View →

By stage: printers, pre-press, dryers, handling, squeegees.

03 · Knowledge

Guides

Linked from the applications above.

All guides →
Guide

Semi-automatic vs fully automatic screen printing machine

A semi-automatic screen printing machine prints by itself, but an operator loads and removes each sheet. A fully automatic machine also feeds, registers and delivers the sheet to the dryer. Semi-automatic suits short runs and many job changes. Fully automatic suits steady volume, where output and consistency repay the higher cost.

Read →
Guide

Imported vs Indian screen printing machine

A lower-cost Indian-made screen printing machine is a sensible choice for simple graphics, wide tolerances, short runs and a tight budget. A precision imported press earns its cost on multi-layer and functional work, tight register and high volume, where rejects are expensive. The tolerance of your part and the cost of a rejected sheet decide it.

Read →
Guide

Fine-line screen printing on polycarbonate

Fine lines on polycarbonate need four things to be right together: a fine mesh at high tension, a thin and flat stencil with a sharp image, a sharp squeegee at low pressure, and a clean, flat sheet free of static. Lines of around 100 to 150 microns are typically achievable on a well set flatbed press. Finer lines need closer control of every step.

Read →
Guide

Screen tension in N/cm

Screen tension is the pulling force in the stretched mesh, measured in newtons per centimetre (N/cm) with a tension meter resting on the mesh. Most polyester screens for industrial work run at about 16 to 30 N/cm. The right figure depends on the mesh count and thread diameter, and the mesh maker's data sheet gives it for each mesh.

Read →
Guide

Off-contact and snap-off

Off-contact distance, also called snap-off, is the gap between the underside of the screen and the substrate before the squeegee presses the mesh down. On a well-tensioned screen it is typically 1 to 3 mm for small frames and 3 to 8 mm for large frames. Use the smallest gap that lets the mesh lift cleanly behind the squeegee.

Read →
Guide

Registration problems in multicolour printing

Registration problems in multicolour screen printing come from four places: the screens, the substrate, the press and the artwork. Look at how the error behaves before changing anything. A constant error is a setup fault. A random error is a feeding fault. An error that grows across the sheet is a change of size in the screen or the substrate.

Read →
Video

From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →
Flexible PCBs in Cars: How Screen Printing Powers Automotive!
Sunstar Academy · 2:35

Flexible PCBs in Cars: How Screen Printing Powers Automotive!

How are flexible PCBs and printed electronics changing modern cars?

FAQ

Questions buyers ask

Which machine prints speedometer dials?

A flatbed screen printer with a vacuum bed and accurate register, such as the ATMA AT-80P/SV or the automatic ATMACE series.

What is IMD printing?

In-mould decoration. A film is screen printed, formed to shape and placed in the injection mould, so the graphic ends up inside the finished part.

Which machine is best for decal printing in volume?

A stop-cylinder press such as the SPS VTS SL-71, which prints up to 4,000 sheets an hour and delivers straight into the dryer.

Is there a dedicated machine for gasket printing?

Yes. The ATMATIC GD series is built for gasket bead printing, with part handling and a heavy-deposit print head.

Why does the machine matter for printed sensors?

The electrical value of the part follows the ink thickness. A servo print stroke and a stable screen lift keep the deposit the same from sheet to sheet.

Inquiry

Tell Sunstar what you print.

An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.

0 machines