Skip to content
Sunstar Graphics Brochures

Process · Stage 03 of 03

Post-press: curing and drying

After the press, the ink has to be dried or cured before sheets are stacked or printed again. The dryer is matched to the ink and to the speed of the press.

The steps
Film

The machines in this stage, working

Animated models, one cycle each.

How an IR tunnel dryer worksPrinted sheets ride a belt through infrared heaters, then hot air carries the solvent away and a cooling zone brings the sheet back to room temperature.Animated model of this machine. Silent, 30 seconds.Open the interactive 3D version
Curing in the tunnelIllustration
Cutting reel to sheetIllustration

Illustrations generated with AI to show each step. They are not photographs of a specific machine.

Video

From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →
SPS VITESSA XP57 primeline | Inline Drying Technology
Sunstar Academy · 1:40

SPS VITESSA XP57 primeline | Inline Drying Technology

Printing the sheet is only half the job. What happens after the print can determine how quickly the finished sheet is ready to handle, pack, and use.

FAQ

Questions buyers ask

IR or UV dryer?

IR and hot air for solvent, water-based and plastisol inks. UV for UV inks.

How is a dryer sized?

By the width of the sheet and the speed of the press, so the ink is cured at full output.

Inquiry

Tell Sunstar what you print.

An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.

0 machines