Skip to content
Sunstar Graphics Brochures
SignTronic · SwitzerlandSignTronic STM-TEC screen making
SignTronic · Switzerland

SignTronic STM-TEC

High-performance CtS system for technical applications with high imaging speed.

Screen making machines prepare the screen before printing: stretching the mesh, coating emulsion, washing, developing, drying and reclaiming.

Sub-typeComputer to screen (CTS) systems
SeriesStencilMaster TEC-Series (Generation 4)
Made inSwitzerland
In IndiaSupplied, installed and serviced by Sunstar
Compare

Source: manufacturer page

Film

How it works

How computer-to-screen imaging worksThe coated screen is clamped upright and a UV head scans across it, exposing the artwork directly onto the emulsion. No film positive is needed.Shown on the SignTronic STM-ONE. Silent, 30 seconds.Open the interactive 3D version
SignTronic STM-ONE

How computer-to-screen imaging works

The coated screen is clamped upright and a UV head scans across it, exposing the artwork directly onto the emulsion. No film positive is needed.

The same type of machine, shown on the SignTronic STM-ONE. The cycle on the SignTronic STM-TEC works the same way.

Open the interactive 3D versionThe SignTronic STM-ONE page →
01 · Overview

About the SignTronic STM-TEC in India

High-performance CtS system for technical applications with high imaging speed. The SignTronic STM-TEC is made by SignTronic in Switzerland. Sunstar Graphics supplies the SignTronic STM-TEC in India with installation, operator training, service and spare parts from Mumbai. See all pre-press in the range, the price guide, or send an enquiry.

02 · Specs

Specifications

From the manufacturer. Ask Sunstar for the full tech sheet.

Compare with another model →
Max. screen format (H x W)1200 x 900 mm (XS) / 1200 x 1250 mm (S)
Max. exposure format (H x W)1050 x 740 mm (XS), 1050 x 1040 mm (S)
Resolution1270 dpi, 1609 dpi (HR1), 2400 dpi (HR2), 3040 dpi (HR3)
Imaging speedExposure speed: up to 650 mm/sec.
LoadingAutomatic positioning; loaded and unloaded from both sides
Dimensions (H x W x D)XS: 2035 x 2000 x 985 mm; S: 2035 x 2400 x 985 mm
Net weightXS: ca. 1250 kg; S: ca. 1350 kg
IN-LINE capabilityModular extension with Grünig-SignTronic IN-LINE equipment (magazines, developing, coating, air blower, drying)
UV light sourceLED_Q4 (Gen6), High power CPL 330 W or UV-LED DUO (385 nm / 405 nm)
LED_Q4 wavelengths365 / 385 / 395 / 405 nm (MODULAR CtS CONCEPT table)
Imaging technologyDMD (Digital Micro-mirror Device) with ZEISS optics; OECU (Optical Engine Control Unit)
SoftwareSTPrint V.4 (in-house user software); RIP: SignTronic ST.Rip
Required data format1-bit TIFF
Data interfaceEthernet 1-Gbit
Operating systemWindows 11
Power consumption~1100 W
Power supply208-240 VAC / 50 - 60 Hz / 16A
Compressed air6 bar (87 psi); max. 50 l/min; quality ISO 8573-1 4.4.4
Room conditionsYellow light, dust free, vibration-free floor; 18 - 24 C; 25 - 75 % rH; floor load 500 kg/m2
OptionsRICB (Remote Image Control Board); Masterframe M (reception unit for various smaller screens); higher resolutions HR1/HR2/HR3

Figures are from the manufacturer. Ask Sunstar for the full tech sheet and the configuration for your job.

03 · Features

Features

  • MODULAR CtS CONCEPT / Generation 4 Technology
  • Exposure speed: up to 650 mm/sec
  • High-quality exposure head with a guaranteed resolution of 1270, 1609, 2400 or 3040 dpi
  • UV light sources based on the MODULAR CtS CONCEPT: LED_Q4, CPL lamp or LED DUO guarantee perfect exposure for almost all meshes and emulsions
  • One hundred percent precision for the image positioning on the screen, thanks to laser recording
  • Rugged and high-quality construction
04 · Applications

Applications

Jobs this machine is specified for on Sunstar lines.

All applications →

The manufacturer lists: technical / industrial applications, high imaging speed.

05 · Documents

Everything for this machine

Data sheet, maker brochures, films and drawings in one place. Files open after one short form; drawings and manuals come on request.

All brochures →
Documents for the SignTronic STM-TEC
PDFSunstar data sheetPDF · 95 KBPDFSTM-TEC LeafletPDF · EN · 390 KB

Get every document Sunstar holds for the SignTronic STM-TEC in one email.

06 · Buying

Buy the SignTronic STM-TEC

Delivered and installed in India.

To buy the SignTronic STM-TEC, send an enquiry with your material, print size and volume per hour. Sunstar sends a quotation in rupees, then handles the import, delivery to your factory, installation and operator training. Sunstar Graphics delivers and installs anywhere in India from Mumbai, including Mumbai, Pune, Delhi NCR, Chennai, Bengaluru, Hyderabad, Ahmedabad, Kolkata, Coimbatore. How buying works.

FAQ

Questions buyers ask

What is the price of the SignTronic STM-TEC in India?

Sunstar Graphics quotes the SignTronic STM-TEC in Indian rupees against your job. Send the material, print size and volume per hour, and the quotation and tech sheet follow within one working day.

Who supplies and services the SignTronic STM-TEC in India?

Sunstar Graphics Pvt. Ltd., Mumbai, is the SignTronic distributor in India. Sunstar supplies the SignTronic STM-TEC, installs it, trains the operators and services it.

Why automate screen making?

Tension, coating thickness and washout decide print quality. Automatic machines make every screen the same.

Does Sunstar supply the full screen room?

Yes. Stretching, coating, imaging, washing, drying and reclaiming, specified together.

Inquiry

Ask for the SignTronic STM-TEC.

Price, delivery time and the tech sheet for the SignTronic STM-TEC, from an engineer within one working day.

0 machines