
ATMA ATMALINE RR3250-C
Among next generation of sunrise industries, FPC (Flexible Electronics) technology is being developed rapidly, flexible electronics is generally known technology, which is configured components onto thin film or metal foil or flexible substrateApplication of flexible electronic technology is widely used currently, except for the earlier development and mature technology of FPC industry, Flexible Display, E-paper, Thin Film Solar Cell, RFID and so on is application scope of flexible electronics, great potential development in futureCombined with Roll-to-Roll continual processing to produce flexible electronic products, also achieves advantage of production efficiency and cost down.
A flatbed screen printer holds the sheet flat on a vacuum bed while the print head moves the squeegee across the screen. It prints rigid and flexible sheets up to 25 mm thick.
Source: manufacturer page
About the ATMA ATMALINE RR3250-C in India
Among next generation of sunrise industries, FPC (Flexible Electronics) technology is being developed rapidly, flexible electronics is generally known technology, which is configured components onto thin film or metal foil or flexible substrateApplication of flexible electronic technology is widely used currently, except for the earlier development and mature technology of FPC industry, Flexible Display, E-paper, Thin Film Solar Cell, RFID and so on is application scope of flexible electronics, great potential development in futureCombined with Roll-to-Roll continual processing to produce flexible electronic products, also achieves advantage of production efficiency and cost down. The ATMA ATMALINE RR3250-C is made by ATMA in Taiwan. Sunstar Graphics supplies the ATMA ATMALINE RR3250-C in India with installation, operator training, service and spare parts from Mumbai. See all printers in the range, the price guide, or send an enquiry.
Specifications
From the manufacturer. Ask Sunstar for the full tech sheet.
Compare with another model →| AT_RR2350-C (Unwinding Machine) | |
|---|---|
| Feed-in Mode | Vacuum roller winding |
| Transmission Mode | Servo power winding |
| Proceed along edge Mode | Structural EPC |
| Proceed along edge Margin | ±10mm |
| Tension Control Mode | Vertical type, servo control |
| Unwinding Tension | 0.5-3.0kgf |
| Unwinding Speed | 10-100mm/sec |
| Cutting / Lamination Device | Attachment |
| CCD Camera | 4 pcs |
| FOV scope | 15x20mm |
| Image Detection Mode | Detect up / down registration mark simultaneously |
| Camera detection scope | X=±75-±250mm Y=±100-±170mm |
| Operation Interface | HMI (parameter setting) |
| Enclosure Mode | Feed-in Section: upper enclosure Printing Section: full enclosure |
| Power source | 3ph,220/380V,50/60Hz |
| Machine dimension | 3525x1725x2350mm |
| Machine weight | 2,220kgs |
| AT_RI3250 (Inspection) | |
| Quality Inspection | Manual moving CCD inspection + monitor display (12.1 inch) |
| Inspection CCD Camera Number | 1 pc (colored camera) |
| Camera FOV | 12.5x17 mm |
| Inspection Area | 340x500 mm |
| CCD Height | 91mm |
| Conveyor Speed | 10~100mm/sec () |
| Conveyor Delivery | Vacuum roller conveyor, servo motor driven |
| Vacuum Mode | Vacuum ring blower |
| Cutting / Lamination Device | Yes |
| Air floating Inspection Platform | Yes |
| Material Connecting Structure | Yes (3" Air Shaft) |
| Equipment Exterior Enclosure | Lift protective cover |
| Power source | 3ph,220/380V,50/60Hz |
| Machine dimension | 1475×870×1840mm |
| Machine weight | 700 kgs |
| AT_RB3250 Standstill Machine | |
| Conveyor Speed | 10~100mm/sec (adjustable) |
| Conveyor Mode | Vacuum conveyor roller, servo driven |
| Vacuum Roller Height | 1780+60 mm |
| Vacuum Roller Group | 6 sets (induction motor driven) |
| Vacuum Mode | Vacuum ring blower |
| Equipment Exterior Enclosure | Enclosure protection |
| Power source | 3ph,220/380V,50/60Hz |
| Machine dimension | 3495×955×2410mm |
| Machine weight | 1150 kgs |
| AT_RIO4032 Dryer | |
| Model | AT_RW3250 Winding Machine |
| Conveyor Delivery | Vacuum roller |
| Effective Conveyor Width | 250300320340mm |
| Transmission Mode | Vacuum roller transmission |
| Conveyor Height | 1750+60mm |
| Conveyor Speed | 0.5-6 M/min |
| Heating Mode | IR + Hot air circulation |
| Heating Section | 4 sections |
| Conveyor Length | Total 16M |
| Ventilation | Air blower |
| Ventilative Direction | from up to down |
| Material | Thermal isolation inner layer adopted SUS 430 Thermal isolation external layer adopted SS41 lacquer |
| Warm Up System | Hot air +IR |
| Temperature Control System | Hot air circulation |
| Temperature Range | Room temperature +20~200℃ |
| Circulation System | 10.5 inch fan circulation |
| Average Temperature | Setting temperature within ±3% |
| Operation Interface | Proface 7 inch HMI, parameter setting |
| General Setting | Heat extraction 16CMM (mechanical valve adjustable flow rate) |
| Protection Device | Temperature controller over heating setting, over heating temperature 10℃ to cut off electrothermalElectric over temperature protector (temperature setting, highest +20℃), exceed setting temperature to cut off electrothermalDepending on HMI display error message, three color warning lamp + buzzer, E-stop button |
| Power source | 3ph,220/380V,50/60Hz |
| Machine Dimension L×W×H | 4300×1500×2100mm (heating section length: 3760mm) |
| Machine weight | 650 kgs |
| Winding mode | 90° vacuum roller conveyor (servo motor driven) |
| Winding Speed | 10-100 mm/sec |
| Vacuum Mode | Ring Blower |
| Proceed along edge Mode | Corrector + Structural EPC±10mm |
| Tension Control Mode | Loadcell + Servo control |
| Winding Tension | 0.5-3 kgf |
| Equipment Exterior Enclosure Mode | Lift protective cover |
| Machine dimension | 1250×1195×1390mm |
Figures are from the manufacturer. Ask Sunstar for the full tech sheet and the configuration for your job.
Features
- Servo Control Tension: conveyor mode adopts servo power coupling structure EPC, tension control adopts self-development vertically, servo tension control
- CCD Registering: enclosed with 4 sets CCD registering and four axis (XYXY) servo driven screen displacement to attain function of precise registration and printing
- Equalized Pressure Control: printing head adopts equalizing air pressure control, squeegee/ flood coater digital equalizing system control can be preset (3-62 kgf) on touch screen panel
- High Level Accuracy: thick Aluminum alloyed plate with precise machining and iodized treatment is used for table top, prevent scratching substrate, table flatness accuracy achieves ±0.02mm
- Quick Operation: Advanced IPC integration control, colored touch-screen + colored LCD monitor provide diverse functional parameters setting and instant operating / surveillance, easy operation to fulfill perfect requirement for digitalization, standardization, humanization
- Safety Protection: equipped with error diagnosis, safety restoration, E-stop, three color warning lamp, etc, comprehension protection
Applications
Jobs this machine is specified for on Sunstar lines.
All applications →The manufacturer lists: pcb fully automatic screen printing line.
Everything for this machine
Data sheet, maker brochures, films and drawings in one place. Files open after one short form; drawings and manuals come on request.
All brochures →Get every document Sunstar holds for the ATMA ATMALINE RR3250-C in one email.
Buy the ATMA ATMALINE RR3250-C
Delivered and installed in India.
To buy the ATMA ATMALINE RR3250-C, send an enquiry with your material, print size and volume per hour. Sunstar sends a quotation in rupees, then handles the import, delivery to your factory, installation and operator training. Sunstar Graphics delivers and installs anywhere in India from Mumbai, including Mumbai, Pune, Delhi NCR, Chennai, Bengaluru, Hyderabad, Ahmedabad, Kolkata, Coimbatore. How buying works.
More printers








Questions buyers ask
What is the price of the ATMA ATMALINE RR3250-C in India?
Sunstar Graphics quotes the ATMA ATMALINE RR3250-C in Indian rupees against your job. Send the material, print size and volume per hour, and the quotation and tech sheet follow within one working day.
Who supplies and services the ATMA ATMALINE RR3250-C in India?
Sunstar Graphics Pvt. Ltd., Mumbai, is the ATMA distributor in India. Sunstar supplies the ATMA ATMALINE RR3250-C, installs it, trains the operators and services it.
Does Sunstar install and service this machine in India?
Yes. Sunstar engineers install the machine, train your operators on site and handle service and spares from Mumbai.
What can a flatbed screen printer print on?
Rigid and flexible sheets: polycarbonate, polyester, PVC, glass, metal and board, up to 25 mm thick.
Inquiry
Ask for the ATMA ATMALINE RR3250-C.
Price, delivery time and the tech sheet for the ATMA ATMALINE RR3250-C, from an engineer within one working day.
