---
title: Screen Printing Squeegees: RKS and Kuroki | Sunstar Graphics
url: https://www.sunstargraphics.com/squeegees/
description: Two squeegee lines from Sunstar Graphics: RKS from Germany and Kuroki from Taiwan. Blade types, edge profiles and Shore hardness explained in plain words.
last_updated: 2026-11-19
---

# Squeegees in India: two lines, blade types, edges and hardness

A squeegee is the blade that pushes ink through the screen onto the material. It sets how much ink goes down and how sharp the printed edge is. Sunstar Graphics sells two squeegee lines to printers across India from Mumbai. One is RKS of Germany, with RKS blades, holders and grinding machines. The other is Kuroki of Taiwan, with polyurethane blades priced for Indian printers.

## Find your squeegee

Tap through your job, or start from your industry. Your blade spec updates as you go: hardness, edge, build, angle and length, with the reason behind each choice.

How it decides →

The squeegee finder runs in your browser and needs JavaScript. You can also send the ink, the material, the finest detail, the ink deposit and the press to [Sales@sunstargraphics.com](mailto:Sales@sunstargraphics.com), and Sunstar suggests a blade.

### Ink

### Printing on

### Finest detail

### Ink deposit

### Press

mm

Width of the image, across the stroke.

**Refine further**

Mesh count Run length Using RKS holders?

Spec ref . A starting point: the final choice also depends on stencil, mesh tension and press settings.

## Two squeegee lines

Sunstar sells two squeegee lines. Both are supplied from Mumbai.

### RKS

For lines and machines that specify RKS blades and holders. RKS makes squeegee blades, holders and grinding machines in Germany. Sunstar supplies the RKS range in India.

RKS HT1

blade

RKS SYSTEM SQUEEGEE (Type 00 / Type 00 BW / Type 32 / Type 32 BW)

blade

RKS CARBON S (VU)

blade

RKS RS

blade

RKS SQUEEGEE HOLDER TYPE U / TYPE S

holder

RKS SM 600 TT / SM 1200 TT

sharpener

All 17 RKS products on this page

List

RKS brand page

### Kuroki

For presses that do not need RKS blades or holders. Kuroki makes polyurethane squeegee blades in Taiwan. They are priced for Indian printers, and the formula and size can be customised. Sunstar supplies seven Kuroki series in India.

XP

Solvent-resistant. For high-precision printing.

SR

Solvent-resistant and economical. Also made as double-layer, triple-layer, square and curved-tip blades.

SP

Transparent. For water-based and UV inks, and for fabric printing.

EP

For polarized inks, such as blood glucose test strip printing.

TP

High hardness and wear-resistant. Reduces wear on gravure or steel plates compared with steel scrapers.

VP

Very resilient and durable. For fabrics, plastic leather and similar substrates.

FRP

Fibreglass base. For solar cell, cylindrical and other high-precision printing.

Kuroki brand page

Not sure which line fits your press? Send the press model and the job. Sunstar tells you which line to use.

## Types of squeegee

Seven constructions, from a plain polyurethane strip to carbon-backed and rotary blades.

### Single-durometer polyurethane strip (RKS HT1, Printan Monoflex)

One hardness through the whole strip. RKS HT1 comes in Soft 65, Medium 75 and Hard 85 Shore A in the RKS HT polyurethane, which is made for UV and solvent-based inks. Printan Monoflex is the universal strip, colour-coded from 65 to 95 Shore A. Heights 20 to 50 mm, thickness 5 to 10 mm, production length about 3,660 mm.

Best for: Graphic and general industrial screen printing with UV or solvent inks, on flatbed and cylinder presses.

### Dual-durometer strip (RKS Printan Biflex)

Two layers in one strip: a softer printing face of 65 or 75 Shore A backed by a 95 Shore A layer. The soft face seals against the screen; the hard backing resists bending under pressure.

Best for: Jobs that need a soft printing edge but a blade that stays straight on long strokes.

### Triple-durometer or sandwiched strip (RKS Printan Triflex, RKS HT3)

Three layers: a hard core between two softer outer layers. Printan Triflex is 65/95/65, 75/95/75 or 65/95/75 Shore A. RKS HT3 has a 90 Shore A core and comes as Soft 65/90/65, Medium 75/90/75 and Hard 85/90/85, in heights 30, 40 and 50 mm and thickness 8, 9 or 10 mm. The HT3 polyurethane is made for polymer pastes and silver-containing media. Triflex is not made in 6 mm.

Best for: Solar cell and printed electronics paste printing, and any job where a soft edge and a stiff blade are both needed. The HT3 Hard grade is RKS's choice for extreme fine lines.

### Glass-fibre stabilised blade (RKS System Squeegee)

The original RKS two-component squeegee: a glass-fibre (GRP) carrier about 1.7 or 2.5 mm thick, permanently bonded to a 13 mm high Vulkollan polyurethane strip of 6 or 8 mm. Type 00 has a continuous carrier; Type 32 tapers from 2.5 mm to 1.4 mm in the PU area. Hardness 55 to 85 Shore A. Heights from 20 to 145 mm: blades up to 50 mm go into a normal holder with an aluminium shim, and 95, 105 and 115 mm blades clamp straight into RKS holders. Lengths from 100 to 2,800 mm.

Best for: Standardised, repeatable production on flatbed presses, where the same angle and pressure must hold across a long run.

### Carbon-fibre stabilised blade (RKS Carbon S, Carbon BW, Carbon HT PK)

The same idea with a carbon-fibre (CRP) carrier, 1.2, 1.7 or 2.5 mm thick, which is stiffer than glass fibre so the blade can be thinner and more flexible. Carbon S carries a Vulkollan edge in 55 to 85 Shore A. Carbon BW carries the RKS HT edge, moulded onto the carrier by heat, with a 45 degree chamfer of 0.5 to 4 mm; from a 1.7 mm carrier it also carries static charge away through the machine's earthing. Carbon HT PK has a 14 mm thick HT edge in 65, 75 or 85 Shore A, ground at 30, 45 or 60 degrees, in lengths up to 400 mm.

Best for: Carbon S: flatbed presses that want a thin, flexible stabilised blade. Carbon BW: solar and printed electronics lines (DEK, Baccini, EKRA, ASYS and similar) where paste deposit must repeat. Carbon HT PK: SMT solder paste, head gaskets and 3D parts.

### Rotary blade (RKS RS, RS CC, RS WP, RS WP CC)

Thin, very flexible blades for rotary screen units: a 0.8 mm glass-fibre (RS) or carbon-fibre (WP) carrier with a Vulkollan or colour-coded HT edge of 1.5, 2 or 3 mm. The edge is rounded, in a small or large radius. RS WP types are cut to the length of specific Gallus units and ordered in lots of ten. All rotary blades can be reground.

Best for: Narrow-web label presses with rotary screen units. Use 3 mm at 55 Shore A for Braille and heavy deposits, 2 mm at 65 for normal work, 1.5 mm at 75 to 85 for fine lines and halftones.

### Diamond-section strip (RKS Printan Diamond)

A square polyurethane strip of 9.5 x 9.5 mm or 9.65 x 9.65 mm, mounted on the diagonal so that one corner prints. Hardness 65, 75 or 85 Shore A, lengths 100 to 1,200 mm.

Best for: Solar cell and microelectronics printers whose print heads take a diamond squeegee.

## Edge profiles

The shape of the printing edge changes the deposit as much as the hardness does.

| Profile | Also called | Shape | Use |
|---|---|---|---|
| Flat or square edge | PO profile (to be confirmed by Sunstar), rectangular, 90 degree | The strip is cut square, so the printing edge is a sharp 90 degree corner. This is the standard profile on HT1 and Printan strips, and the RKS System blade is ground close to it, at 92 degrees plus or minus 1 degree. | The thinnest and sharpest deposit. Use it for fine lines, halftones, text and most graphic work. A sharp square edge is the first thing to check when detail goes soft. |
| Single bevel or slanted edge | PK1 and PK2 profiles with a 1 mm or 2 mm land (to be confirmed by Sunstar), chamfered edge, Carbon HT PK 30, 45 and 60 degree edge | One face of the strip is ground at an angle so the blade meets the screen on a slant, with a small flat land at the tip. On the Carbon BW the chamfer is 45 degrees with a land of 0.5, 1, 2, 3 or 4 mm; on the Carbon HT PK the edge angle is 30, 45 or 60 degrees. | A heavier, more even deposit than a square edge, with the blade angle built into the profile rather than set on the press. Used for pastes, thick films and gasket beads, and on printed electronics lines where the deposit must repeat. |
| Double bevel or V edge | PV profile (point), PV1 and PV2 with a 1 mm or 2 mm flat (to be confirmed by Sunstar) | Both faces are ground so the strip comes to a point, or to a narrow flat of 1 or 2 mm. The blade can print in both directions with the same edge. | Sharp, controlled deposit when the press prints on the forward and return stroke, or when the operator wants the edge to behave the same whichever way the blade is turned. |
| Rounded or curved edge | PR profile (to be confirmed by Sunstar), radius edge, small radius (SR/KR) and large radius (LR/GR) on rotary blades | The printing edge is rounded instead of sharp. On RKS rotary blades the radius is chosen when ordering: a small radius close to a square corner, or a large radius that is a long curve. | The heaviest deposit of the standard profiles. Used for textured surfaces, high ink films, Braille and textile transfers. A worn square edge turns into a rounded edge by itself, which is why the deposit rises as a blade wears. |
| Diamond edge | Printan Diamond, rhombic squeegee, diamond squeegee | A square section strip held on its diagonal, so the printing edge is a 90 degree corner with a face sloping away on both sides. | A sharp edge with a stiff body, fitted in solar and microelectronics print heads built for this profile. |

## Hardness

Shore A, from soft to very hard, and what each band is for.

- 55 to 65 Shore A, soft: **For heavy ink deposits, Braille, textured or uneven surfaces and textile transfers. RKS recommends 55 Shore A with a 3 mm edge on rotary units for Braille. Soft blades follow the surface but bend more under pressure, so keep the pressure low.**
- 65 to 75 Shore A, medium: **The general-purpose range. RKS recommends 65 Shore A for conventional rotary printing, and HT1 Medium or Printan 70 to 75 for most flatbed graphic work with UV and solvent inks. Start here if the ink maker's data sheet gives no figure.**
- 75 to 85 Shore A, hard: **For exact work, fine lines and halftones. RKS recommends 75 to 85 Shore A with a 1.5 mm edge on rotary units, and the HT3 Hard 85/90/85 grade for extreme fine lines in paste printing. A hard blade puts down less ink and holds a sharper edge.**
- 85 to 95 Shore A, very hard and backing layers: **Rarely used as a single strip. Printan Monoflex goes up to 95 Shore A, and 90 or 95 Shore A is the core or backing layer in Biflex, Triflex and HT3 strips, where it stiffens the blade while a softer face does the printing. On stabilised blades the carrier does this job, so a 65 Shore A edge on a 6 mm strip acts harder than the same edge on an 8 mm strip.**

## About the RKS line

Blades, holders and grinding machines from one maker in Germany.

### Blades that keep their angle

RKS makes stabilised squeegees: a thin polyurethane printing edge bonded to a rigid glass-fibre or carbon-fibre carrier. The carrier holds the blade parallel to the screen through the stroke, so the printing angle and the pressure stay the same from the first sheet to the last.

### Delivered ready to print

RKS stabilised blades (System, Carbon and Rotary) are ground on RKS grinding machines before dispatch. The print edge and the front face are ground flat and parallel, so the blade goes into the holder and prints without a first sharpening.

### Every hardness and size

RKS offers Shore hardness from 55 to 95 Shore A depending on the series, PU thickness from 1.5 to 14 mm, heights from 20 to 145 mm, and cut lengths from 100 mm to 2,800 mm (PU strips up to about 3,660 mm). Non-standard heights are made on request.

## Squeegee blades, holders and sharpeners

RKS and Kuroki blades, RKS holders and grinding machines, with ATMA sharpeners and ink mixers.

All brands →

- [**ATMA AT-LM4**](https://www.sunstargraphics.com/machines/atma-at-lm4/): For even mixing ink and additives.
- [**ATMA AT-MIX7**](https://www.sunstargraphics.com/machines/atma-atmix-7-v/): For even mixing ink/ emulsion and their additives.

- [**ATMA AT-S100**](https://www.sunstargraphics.com/machines/atma-at-s100/): For sharpening squeegee blade on holder in order to obtain flat straight and sharp edges.
- [**ATMA AT-S100D**](https://www.sunstargraphics.com/machines/atma-ats-100d/): For sharpening squeegee blade on holder in order to obtain flat straight and sharp edges.

- [**ATMA AT-S150**](https://www.sunstargraphics.com/machines/atma-at-s150/): For sharpening squeegee blade on holder in order to obtain flat straight and sharp edges.
- [**ATMA AT-S150D**](https://www.sunstargraphics.com/machines/atma-at-s150d/): For sharpening squeegee blade on holder in order to obtain flat straight and sharp edges..

- [**ATMA AT-S200**](https://www.sunstargraphics.com/machines/atma-at-s200/): This is semi-automatic sharpener, robust structure of squeegee clamping structure assures grinding straightness.
- [**ATMA AT-S200D**](https://www.sunstargraphics.com/machines/atma-at-s200d/): Automatic digital control design is applied to handle coarse and fine grinding with precise straightness, flatness and sharpe edge.

- [**Kuroki EP**](https://www.sunstargraphics.com/machines/kuroki-ep/): Polyurethane squeegee blade for printing with polarized inks, such as blood glucose test strips.
- [**Kuroki FRP**](https://www.sunstargraphics.com/machines/kuroki-frp/): Polyurethane squeegee blade on a fibreglass base, for solar cell, cylindrical and other high-precision printing.

- [**Kuroki SP**](https://www.sunstargraphics.com/machines/kuroki-sp/): Transparent polyurethane squeegee blades for water-based and UV inks, high-speed UV printing and fabric printing.
- [**Kuroki SR**](https://www.sunstargraphics.com/machines/kuroki-sr/): Economical solvent-resistant polyurethane squeegee blade, also made in double-layer, triple-layer, square and curved-tip forms.

- [**Kuroki TP**](https://www.sunstargraphics.com/machines/kuroki-tp/): High-hardness, wear-resistant polyurethane blade that reduces wear on gravure or steel plates compared with steel scrapers.
- [**Kuroki VP**](https://www.sunstargraphics.com/machines/kuroki-vp/): Highly resilient polyurethane squeegee blade for fabrics, SPTE, plastic leather and other substrates.

- [**Kuroki XP**](https://www.sunstargraphics.com/machines/kuroki-xp/): Solvent-resistant polyurethane squeegee blade for high-precision printing.
- [**Lingtie ZLO-1000B1**](https://www.sunstargraphics.com/machines/lingtie-zlo-1000b1/): Automatically squeegee sharpener, necessary ancillary machine for screen printing machine.

- [**RKS ALUMINIUM SPACER / INSERT BAR (Beilageleiste)**](https://www.sunstargraphics.com/machines/rks-aluminium-spacer/): Spacer strip that lets an RKS System or Carbon S blade be installed in an existing standard squeegee holder.
- [**RKS CARBON BW**](https://www.sunstargraphics.com/machines/rks-carbon-bw/): Multi-component hybrid squeegee with a next-generation carbon carrier and a printing edge made from the RKS HT polyurethane, thermally moulded (not glued) and delivered ready to print.

- [**RKS CARBON HT PK**](https://www.sunstargraphics.com/machines/rks-carbon-ht-pk/): Carbon-fibre carrier combined with RKS high-performance HT polyurethane, with a plane-parallel sharp printing edge profiled on fully automatic machines, for SMT, head gaskets, 3D and similar precision printing.
- [**RKS CARBON S (VU)**](https://www.sunstargraphics.com/machines/rks-carbon-s/): Patented carbon-fibre-backed squeegee with an original Vulkollan polyurethane printing edge, produced as a thinner and more flexible blade for flatbed screen printing machines.

- [**RKS HT1**](https://www.sunstargraphics.com/machines/rks-ht1/): Single-layer polyurethane squeegee in RKS HT quality, modified for UV and solvent-based inks, in three colour-coded hardnesses.
- [**RKS HT3**](https://www.sunstargraphics.com/machines/rks-ht3/): Three-layer polyurethane squeegee designed for the electronics industry, for printing polymer-like pastes and silver-containing print media.

- [**RKS PRINTAN (MONOFLEX / BIFLEX / TRIFLEX)**](https://www.sunstargraphics.com/machines/rks-printan/): Universal, colour-coded polyurethane squeegee strips for almost all screen-printing applications, in single, dual and triple-layer versions.
- [**RKS PRINTAN DIAMOND**](https://www.sunstargraphics.com/machines/rks-printan-diamond/): Universal, colour-coded diamond-profile squeegee strips for the solar industry, microelectronics and other applications.

- [**RKS RS**](https://www.sunstargraphics.com/machines/rks-rs/): Highly flexible, stabilised two-component rotary squeegee with a glass-fibre carrier and a Vulkollan print edge, for narrow-web rotary screen printing units.
- [**RKS RS CC**](https://www.sunstargraphics.com/machines/rks-rs-cc/): Multi-component hybrid rotary squeegee with a colour-coded RKS HT printing edge thermally encapsulated on a GRP carrier.

- [**RKS RS WP**](https://www.sunstargraphics.com/machines/rks-rs-wp/): Carbon-fibre-carrier rotary squeegee with a Vulkollan print edge, developed with Gallus Ferd. Rüesch AG for Gallus screen printing units.
- [**RKS RS WP CC**](https://www.sunstargraphics.com/machines/rks-rs-wp-cc/): Colour-coded RKS HT printing edge thermally encapsulated on a carbon carrier, for rotary screen printing at all speeds and designs.

- [**RKS SM 1100 AL / SM 1600 AL / SM 2100 AL / SM 2600 AL (SM 3600)**](https://www.sunstargraphics.com/machines/rks-sm-al/): Fully automatic squeegee grinding machine with laser positioning and a double grinding wheel; the operator clamps the blade and selects a program.
- [**RKS SM 600 TT / SM 1200 TT**](https://www.sunstargraphics.com/machines/rks-sm-600-tt-1200-tt/): Lower-cost squeegee grinding machine with a double reversible grinding wheel, controlled grinding speed, vacuum extraction and automatic feed.

- [**RKS SQUEEGEE HOLDER TYPE B 12 / B 12-15 / DK / HMI**](https://www.sunstargraphics.com/machines/rks-squeegee-holder-b12-dk-hmi/): Machine-specific holders and clamping adaptors for using RKS Carbon squeegees on Baccini, DEK and HMI printing lines.
- [**RKS SQUEEGEE HOLDER TYPE U / TYPE S**](https://www.sunstargraphics.com/machines/rks-squeegee-holder-type-u-s/): Pneumatically clamping squeegee holders: Type U retrofits to virtually any screen printing machine, Type S adds a swivel motion for easy blade insertion and removal.

- [**RKS SYSTEM SQUEEGEE (Type 00 / Type 00 BW / Type 32 / Type 32 BW)**](https://www.sunstargraphics.com/machines/rks-rks-system/): The original RKS two-component squeegee: a fiberglass (GRP) spine integrally joined to an elastomer (Vulkollan) printing strip, so the blade keeps a plane-parallel printing edge and a constant angle throughout a production run.

## Read on

- [What is a squeegee in screen printing](https://www.sunstargraphics.com/squeegees/what-is-a-squeegee/): A squeegee is a straight blade, usually polyurethane, that is drawn across the screen to push ink through the open mesh onto the material.
- [How to choose a squeegee](https://www.sunstargraphics.com/squeegees/how-to-choose-a-squeegee/): Start with the ink: solvent and UV inks take a medium polyurethane blade, water-based and plastisol inks a softer one, conductive pastes a stabilised or triple-layer blade.

- [Squeegee glossary](https://www.sunstargraphics.com/squeegees/glossary/): Every term on these pages, from Shore A to snap-off, in one list.
- [Squeegee finder](https://www.sunstargraphics.com/tools/squeegee-selector/): Five questions, or start from your industry. A hardness, edge, build, angle and blade length for your job, with the reason for each.

## From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →

**ATMA S-Series Digital Squeegee Grinder | Full Features** A perfectly sharpened squeegee is the foundation of high-quality screen printing. Sunstar Academy · 2:10

**5 Squeegee Mistakes That Reduce Your Print Quality** 5 Things Every Screen Printing Operator Should Know About Their Squeegee Sunstar Academy · 2:53

## Questions buyers ask

**Which squeegee hardness should I use for screen printing?**

Use 65 to 75 Shore A for general work, 75 to 85 for fine lines and halftones, and 55 to 65 for heavy deposits and textured surfaces. Check the ink maker's data sheet, because the ink and mesh change the answer.

**What is the difference between a conventional and a stabilised squeegee?**

A conventional squeegee is a solid polyurethane strip, and it bends and softens as solvents soak into it during a run. A stabilised squeegee bonds a thin polyurethane edge to a glass-fibre or carbon-fibre carrier that keeps the blade straight and the angle constant.

**Can RKS squeegees be sharpened in India?**

Yes. RKS blades can be reground many times on a squeegee grinder. Sunstar supplies the RKS SM 600 TT and 1200 TT grinding machines, which have an automatic feed and a grinding head set by hand, and the automatic RKS SM series, and installs and trains on them in India.

**Do RKS blades fit my existing squeegee holder?**

RKS blades up to 50 or 60 mm high fit a standard holder with an aluminium adapter strip. Taller blades of 95, 105 and 115 mm clamp directly into RKS Type U and Type S pneumatic holders, which fit most screen printing machines. Sunstar confirms the fit against your press.

**Should I choose RKS or Kuroki?**

Choose RKS if your line or machine specifies RKS blades and holders. Choose Kuroki if the press does not need them: the blades are made in Taiwan and priced for Indian printers. Send the press model and the job, and Sunstar tells you which line to use.

**What is the price of an RKS squeegee in India?**

The rate depends on the series, hardness, height, thickness and cut length. Send an enquiry with the blade specification or the press model and Sunstar Graphics will quote within one working day.

## Ask for a blade.

Send the ink, mesh count, material, press model and image size. Sunstar suggests a blade from either line and quotes within one working day.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
