---
title: Screen Printers for Industry: Flatbed, Cylinder, Roll to Roll
url: https://www.sunstargraphics.com/printers/
description: Industrial screen printers in India from Sunstar Graphics: flatbed, stop-cylinder, roll-to-roll, glass, PCB, part and label printers, with how a press works.
last_updated: 2026-11-17
---

# Screen printing machines: how the press works and which type to buy

The press is the machine that holds the material, brings the screen down onto it and drives the squeegee across the image. The material decides the press. Rigid or thick sheets go on a flatbed screen printing machine. Thin flexible sheets in long runs go on a stop-cylinder press. Continuous webs go on a roll to roll (reel to reel) machine. Glass panels, circuit boards, moulded parts and labels each have presses built around that part.

See the range

Sunstar Graphics is the exclusive distributor in India for ATMA flatbed and application-specific printers from Taiwan, SPS stop-cylinder presses from Germany and Lingtie roll-to-roll printers from China, and installs, trains and services them from Mumbai. The sections below explain the print cycle, what to check before buying, and the seven types of press in the range.

## How it works

1. **Load** The sheet, web or part is placed on the bed or fed in by a feeder and located against stops or registration pins. On an automatic press a camera or CCD system reads marks on the material and corrects the position.
2. **Hold** Vacuum pulls a flat sheet down onto the bed. A cylinder press grips the leading edge of the sheet on the cylinder. A part printer holds the piece in a fixture.
3. **Flood** The flood bar spreads ink over the screen without pushing it through, so the mesh is filled and ready.
4. **Print** The screen comes down to the set off-contact gap and the squeegee travels across the image at a set angle, pressure and speed, pushing ink through the stencil onto the material. On a cylinder press the cylinder turns under the moving screen instead.
5. **Release** The mesh snaps off the print behind the squeegee. The screen lifts, the vacuum releases and the sheet is taken off by hand, by a take-off unit or by a conveyor into the dryer.
6. **Repeat** The next sheet is loaded. A semi-automatic flatbed prints around 500 sheets an hour; an automatic flatbed with feeder prints more; a stop-cylinder press prints 1,800 to 4,000 an hour.

### Compare models

Put two or three machines side by side, specification by specification.

Open the comparison

### 101 models

ATMA, Lingtie, SPS

All printers in the catalogue

### Ask an engineer

Send your material, sheet size and volume. An engineer replies with the right type and model.

## See the machines work

Animated models of the machines in this category, one cycle each. Press play.

All films →

**How a flatbed screen printer works** The sheet is held by vacuum, the screen lowers, the squeegee prints and the flood bar recoats the screen. The take-off arm then lifts the printed sheet onto the dryer belt. Animated model of this machine. Silent, 30 seconds. [Open the interactive 3D version](https://www.sunstargraphics.com/demos/atma/)

**How a stop-cylinder press works** The feeder sends each sheet to the cylinder, grippers close on its edge, and the cylinder turns under the screen while the squeegee holds still. The sheet then leaves for the dryer. Animated model of this machine. Silent, 30 seconds. [Open the interactive 3D version](https://www.sunstargraphics.com/demos/sps/)

## How to choose

What to settle before asking for a quotation.

Buying guides →

### Material and thickness

List every material you print, with sheet size and thickness. Flatbeds take rigid material up to 25 mm; cylinder presses take flexible sheets only; roll-to-roll takes webs. The largest sheet sets the print area.

### Print area and sheet size

Choose a print area that covers your largest image with margin for the frame and the squeegee overrun. Oversizing costs more and slows the cycle; undersizing means jobs you cannot take.

### Volume per day

Count sheets per shift rather than per month. Around 500 an hour suits a semi-automatic flatbed; above that, an automatic flatbed with feeder and stacker; above 1,800 an hour on flexible sheet, a cylinder press.

### Registration and detail

Multicolour work on dials, membrane switches and electronics needs repeat accuracy in hundredths of a millimetre and, for the finest work, CCD camera registration. Ask for the accuracy figure and how it is measured.

### Space, power and the line after the press

Measure the floor, the ceiling height and the door. Check the power supply and compressed air. Plan where the dryer, feeder and stacker go, because the press is one part of a line.

## Flatbed printers

Sheet held flat on a vacuum bed, print head moves the squeegee across the screen. Rigid and flexible sheets up to 25 mm, semi-automatic to fully automatic.

All 44 models →

- [**ATMA ATMACE 67/G(6)**](https://www.sunstargraphics.com/machines/atma-atmace-67-g-6/): Suitable for graphic or industrial printing onto rigid and flexible material flat substrate such as ceramic transfer paper, advertisement sticker or decal, package case for cigarette and liquor, UV varnish, membrane switch, automotive dashboard, etc.
- [**ATMA ATMACE 710/G(6)**](https://www.sunstargraphics.com/machines/atma-atmace-710-g-6/): Four-post screen printer is suitable for graphic or industrial printing onto rigid and flexible material flat substrate such as ceramic transfer paper, advertisement sticker or decal, package case for cigarette and liquor, UV varnish, membrane switch, automotive dashboard, etc.

- [**ATMA AT-120P**](https://www.sunstargraphics.com/machines/atma-at-120p/): Electric flat screen printer is suitable for screen printing on flexible or rigid material flat sheet such as Membrane Switch, Flexible Printer Circuits, Nameplate, Electro-luminescent, etcindustrial products.
- [**ATMA AT-160P**](https://www.sunstargraphics.com/machines/atma-at-160p/): Electric flat screen printer is suitable for screen printing on flexible or rigid material flat sheet such as Membrane Switch, Flexible Printer Circuits, Nameplate, Electro-luminescent, etcindustrial products.

[All 44 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=flatbed)

## Stop-cylinder presses

Flexible sheet gripped on a cylinder that turns under the screen. The fastest way to print sheets, 1,800 to 4,000 an hour, straight into the dryer.

All 8 models →

- [**SPS ASTRON QX 57**](https://www.sunstargraphics.com/machines/sps-astron-qx-57/): The newest generation of STOP cylinder screen printing machines is the SPS ASTRON QX range: an automatic 4-post press that is fully servo driven, with CCD camera image registration to an accuracy of 30 um or better.
- [**SPS ASTRON QX 71**](https://www.sunstargraphics.com/machines/sps-astron-qx-71/): The newest generation of STOP cylinder screen printing machines is the SPS ASTRON QX range: an automatic 4-post press that is fully servo driven, with CCD camera image registration to an accuracy of 30 um or better.

- [**SPS VITESSA SL69**](https://www.sunstargraphics.com/machines/sps-vitessa-sl69/): The SPS VITESSA SL STOP cylinder screen printing machine is engineered to meet the demands of the high-end screen printing industry.
- [**SPS VITESSA SL71**](https://www.sunstargraphics.com/machines/sps-vts-sl-71/): The SPS VITESSA SL STOP cylinder screen printing machine is engineered to meet the demands of the high-end screen printing industry.

[All 8 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=cylinder)

## Roll-to-roll printers

A continuous web from reel to reel, registered by camera on every repeat, with the dryer in line before rewind.

All 11 models →

- [**Lingtie LTA-80200**](https://www.sunstargraphics.com/machines/lingtie-lta-80200/): This machine plays a critical role in the manufacturing process of solar cells by depositing conductive pastes onto the photovoltaic substrate, allowing for the efficient conversion of sunlight into electricity.
- [**ATMA ATMALINE RR3250-C**](https://www.sunstargraphics.com/machines/atma-atmaline-rr3250-c/): Among next generation of sunrise industries, FPC (Flexible Electronics) technology is being developed rapidly, flexible electronics is generally known technology, which is configured components onto thin film or metal foil or flexible substrateApplication of flexible electronic technology is widely used currently, except for the earlier development and mature technology of FPC industry, Flexible Display, E-paper, Thin Film Solar Cell, RFID and so on is application scope of flexible electronics, great potential development in futureCombined with Roll-to-Roll continual processing to produce flexible electronic products, also achieves advantage of production efficiency and cost down.

- [**ATMA ATMALINE RR5060/C**](https://www.sunstargraphics.com/machines/atma-atmaline-rr5060-c/): Fully Auto Roll-to-Roll CCD Registering Bio-Test-Strips Screen Printing Line.
- [**ATMA ATMALINE RR5060/S**](https://www.sunstargraphics.com/machines/atma-atmaline-rr5060-s/): Global population of diabetic is growing gradually year by year, in this huge market and is actively promoted by government of every country, research and improvement of biochemical technology becomes main direction of every country development.

[All 11 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=roll)

## Glass printing lines

Flatbeds with glass handling, large print areas and registration built for panels, appliance glass and PV glass.

All 13 models →

- [**ATMA ATMATIC GS1220**](https://www.sunstargraphics.com/machines/atma-atmatic-gs1220/): Suitable for screen printing on large format glass, such as door for refrigerator, automotive dormer glass, automotive front / back windshield glass, photovoltaic glass and so on.
- [**ATMA ATMATIC GS1225**](https://www.sunstargraphics.com/machines/atma-atmatic-gs1225/): Suitable for printing large format glass such as glass door for refrigerator, automotive dormer glass, automotive front / back windshield glass, photovoltaic glass and so on.

- [**ATMA ATMALINE GS710**](https://www.sunstargraphics.com/machines/atma-atmaline-gs710/): Digital control automatic prining line is didecated to print the rigid material, such as ceramic glass for cooktop, tempered glass for microwave oven door, oven panel, display panel, lamp adornment, and so on.
- [**ATMA ATMALINE GS712**](https://www.sunstargraphics.com/machines/atma-atmaline-gs712/): Digital control automatic printing line is dedicated to print large size of the rigid material, such as ceramic glass for cooktop, tempered glass for microwave oven door, oven panel, Acrylic panel, etc.

[All 13 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=glass)

## PCB and electronics printers

Presses with pin or camera registration for solder mask, legend and conductive layers on rigid and flexible boards.

All 14 models →

- [**ATMA AT-EW120P**](https://www.sunstargraphics.com/machines/atma-at-ew120p/): Dedicated in screen printing photo imageable resistance solder mask plug-via or non-plug-via wet film processing.
- [**ATMA AT-EW120P/S**](https://www.sunstargraphics.com/machines/atma-at-ew120p-s/): Dedicated to print photo-imaginable solder mask plug-via or non-plug-via wet-film process onto PCB.

- [**ATMA AT-EW160P**](https://www.sunstargraphics.com/machines/atma-at-ew160p/): Dedicated to PCB photoimageable solder mask plug-via or non-plug-via wet-film printing process.
- [**ATMA AT-EW80P**](https://www.sunstargraphics.com/machines/atma-at-ew80p/): Dedicated to print photo-imaginable solder mask plug-via or non-plug-via wet-film process onto PCB.

[All 14 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=pcb)

## Part and index-table printers

Fixtures and index tables that bring moulded parts, gaskets and aluminium pieces under the screen one at a time.

All 6 models →

- [**ATMA AT-300FAD**](https://www.sunstargraphics.com/machines/atma-at-300fad/): Pneumatic transmission design is applied for driving screen vertical up down to avoid ink flow bias at lateral side.
- [**ATMA AT-45FB**](https://www.sunstargraphics.com/machines/atma-at-45fb/): Pneumatic transmission design is used for driving screen vertical up down to avoid ink flow bias at lateral side.

- [**ATMA AT-45PAB**](https://www.sunstargraphics.com/machines/atma-at-45pab/): Flat Printing: suitable for precise screen printing on flat plate such as Nameplate, smart phone cover lens, electric component, biomedical tester, automotive dashboard or speedometer, etc.
- [**ATMA AT-45PAD(2I)**](https://www.sunstargraphics.com/machines/atma-at-45pad-2i/): Digital Electric Index Table Screen Printer is suitable for small size flat printing such as electronic components, smart phone cover lens, cosmetic container, silicon rubber switch, etcEquipped with HMI digital control versatile function, easy operating, vacuum table is equipped with micro-adjustment device for quick adjusting precise positioning, servo motor drives printing stroke, collocated with flexible structure to facilitate adjusting angle / depth / level / printing pressure of squeegee, satisfied with various printing conditionTwo-index rotary table to increase productivity, adding safety bar, safety pressing plate, E-stop, error display function, comprehensive protection.

[All 6 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=parts)

## Label and sticker printers

Sheet and web presses set up for self-adhesive stock, with clear-coat and multicolour options.

All 5 models →

- [**Lingtie LTAC-280**](https://www.sunstargraphics.com/machines/lingtie-ltac-280/): Automatic Intermittent Rotary Letterpress Printing Machine with patented automatic registration function.
- [**Lingtie LTAC-280A**](https://www.sunstargraphics.com/machines/lingtie-ltac-280a/): Intermittent Rotary Letterpress label Printing Press carry the patented technology - Automatic Registration Function widely use in sticker printing, film printing.

- [**Lingtie LTAC-320**](https://www.sunstargraphics.com/machines/lingtie-ltac-320/): Enables automatic chromatography before the machine begins printing to reduce material wastage and machine adjustment time.
- [**Lingtie LTAC-320A**](https://www.sunstargraphics.com/machines/lingtie-ltac-320a/): You can choose the Full Rotary Intermittent Label Printing or Semi-rotary Intermittent Printing according to your material dimension.

[All 5 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=printers&q=label)

## Machine types in this category

Each page explains one class of machine and lists its models.

- [Fully automatic flatbeds, cylinder presses and reel-fed printers](https://www.sunstargraphics.com/automatic-screen-printing-machine/): An automatic screen printing machine feeds the sheet, registers it, prints it and delivers it to the dryer without an operator handling each piece.
- [Operator-fed electric flatbeds and precision part printers](https://www.sunstargraphics.com/semi-automatic-screen-printing-machine/): A semi-automatic screen printing machine prints each sheet by motor while an operator loads and unloads it.

- [Flat bed presses for rigid and flexible sheets up to 25 mm thick](https://www.sunstargraphics.com/flatbed-screen-printing-machine/): A flatbed screen printing machine holds the sheet flat on a vacuum bed.
- [SPS presses for flexible sheets at up to 4,000 sheets an hour](https://www.sunstargraphics.com/stop-cylinder-screen-printing-press/): A stop-cylinder screen printing press grips a flexible sheet on a cylinder.

- [Reel to reel printers with camera registration and in-line curing](https://www.sunstargraphics.com/roll-to-roll-screen-printing-machine/): A roll-to-roll screen printing machine prints a continuous web of film or label stock from one reel to another.
- [Camera-aligned presses for fine lines and multilayer printing](https://www.sunstargraphics.com/ccd-registration-screen-printing-machine/): A CCD registration screen printing machine uses cameras to find register marks on the sheet or web before each print.

## Guides

Written for the person choosing the machine.

All guides →

- [Flatbed vs cylinder screen printing machine](https://www.sunstargraphics.com/guides/flatbed-vs-cylinder-screen-printing-machine/): Choose a flatbed if you print rigid or thick material, or mixed jobs in short and medium runs at around 500 sheets an hour. Choose a stop-cylinder press if you print thin flexible sheets in long runs and need 1,800 to 4,000 sheets an hour. Many plants run both.
- [Semi-automatic vs fully automatic screen printing machine](https://www.sunstargraphics.com/guides/semi-automatic-vs-fully-automatic-screen-printing-machine/): A semi-automatic screen printing machine prints by itself, but an operator loads and removes each sheet. A fully automatic machine also feeds, registers and delivers the sheet to the dryer. Semi-automatic suits short runs and many job changes. Fully automatic suits steady volume, where output and consistency repay the higher cost.

- [How to choose an industrial screen printing machine](https://www.sunstargraphics.com/guides/how-to-choose-industrial-screen-printing-machine/): Five facts about your job decide the machine: the material and its thickness, the print size, the output you need per hour, the register tolerance and the ink. With these in hand, the choice between a flatbed, a cylinder press, a roll-to-roll press or a purpose-built printer is usually clear.
- [Imported vs Indian screen printing machine](https://www.sunstargraphics.com/guides/imported-vs-indian-screen-printing-machine/): A lower-cost Indian-made screen printing machine is a sensible choice for simple graphics, wide tolerances, short runs and a tight budget. A precision imported press earns its cost on multi-layer and functional work, tight register and high volume, where rejects are expensive. The tolerance of your part and the cost of a rejected sheet decide it.

- [Screen printing vs digital printing for industrial parts](https://www.sunstargraphics.com/guides/screen-printing-vs-digital-printing-industrial/): Screen printing is the better process for volume production, for thick or opaque ink films and for functional inks such as silver, carbon and glass enamel. Digital printing is better for short runs, many design versions and variable data. It is common to use digital for samples and screen printing for production.
- [How membrane switches are made](https://www.sunstargraphics.com/guides/how-membrane-switches-are-made/): A membrane switch is made by screen printing a graphic overlay and one or two circuit layers on plastic film, then cutting them and laminating them with a spacer and adhesive. The circuit is printed in silver and carbon ink, with a dielectric layer for insulation. Each printed layer is dried or cured before the next, and each has to register to the others.

Other categories: [Pre-press and screen making](https://www.sunstargraphics.com/pre-press/), [Dryers and curing](https://www.sunstargraphics.com/dryers/), [Feeders, stackers and converting](https://www.sunstargraphics.com/handling/), [Squeegees and tools](https://www.sunstargraphics.com/squeegees/). See the [process stage by stage](https://www.sunstargraphics.com/process/) or [start from what you print](https://www.sunstargraphics.com/applications/).

## From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →

**ATMACE 710G | Precision Industrial Screen Printing Redefined** Discover the ATMACE 710G Industrial Flatbed Screen Printing Machine engineered for precision, stability, and production efficiency. Sunstar Academy · 4:33

**SPS VITESSA XP57 Primeline | High-Speed Stop Cylinder Screen Printing Machine** Discover the SPS VITESSA XP57 Primeline, a high-performance stop cylinder screen printing machine designed for textile transfers, plastic cards, printed electronics… Sunstar Academy · 3:28

## Questions buyers ask

**Which screen printing machine is best for industrial work?**

It depends on the material. A flatbed for rigid or thick sheets and mixed jobs, a stop-cylinder press for thin flexible sheets in long runs, and a roll-to-roll machine for webs. Sunstar matches the model to your samples.

**What is the price of an industrial screen printing machine in India?**

Imported industrial presses range from roughly ten lakh rupees to over one crore depending on type, size and automation. Send an enquiry with your material and sheet size for a quotation.

**What is the difference between semi-automatic and fully automatic screen printing machines?**

On a semi-automatic press the operator loads and unloads each sheet and the machine prints. A fully automatic press feeds, prints and takes off by itself, so it runs faster with fewer people.

**Does Sunstar install and service the machine?**

Yes. Sunstar Graphics installs the machine, trains the operators and services it from Mumbai for factories across India.

## Tell Sunstar what you print.

An engineer replies within one working day with the right type and model, and Indian pricing. Delivered and installed anywhere in India.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
