---
title: Feeders, Stackers and Converting Units | Sunstar Graphics
url: https://www.sunstargraphics.com/handling/
description: Feeders, stackers, cutters and converting units for screen printing lines in India from Sunstar Graphics: how automatic sheet handling works and what to…
last_updated: 2026-11-17
---

# Feeders, stackers and converting: automating the line around the press

A screen printing press prints. Everything else in the line moves material: a feeder puts sheets onto the press one at a time, a conveyor carries them through the dryer, a stacker takes them off at the end, and converting units cut, slit or rewind the printed material. When these steps are done by hand, they set the speed of the whole line and the number of people on it.

See the range

Sunstar Graphics supplies feeders, stackers and converting units as part of automatic screen printing lines from ATMA, SPS and Lingtie, and installs and services the complete line from Mumbai. This page explains how automatic sheet handling works, what to check before adding it, and the four kinds of handling equipment.

## How it works

1. **Pile and separate** Sheets sit on a pile table that rises as the pile goes down. Air blows between the top sheets to separate them, and suckers lift the top sheet without taking the one below.
2. **Feed and register** The sheet travels down a feed board to the press and is located against front and side stops, or read by a camera that corrects its position. The press then holds it on vacuum or grips it on the cylinder.
3. **Print and convey** The press prints and the sheet is carried straight onto the dryer belt, so nobody touches the wet print.
4. **Dry and stack** After the cooling zone the sheet is lifted off the belt and laid onto a pile on the stacker, which lowers as the pile grows and jogs the sheets square.
5. **Convert** Printed sheets or webs go on to be cut to size, slit, die-cut or rewound, by hand or on a cutter or rewinder matched to the job.

### Compare models

Put two or three machines side by side, specification by specification.

Open the comparison

### 49 models

Lingtie, SPS

All handling in the catalogue

### Ask an engineer

Send your material, sheet size and volume. An engineer replies with the right type and model.

## How to choose

What to settle before asking for a quotation.

Buying guides →

### Sheet size, weight and material

Feeders and stackers are built for a range of sheet sizes and thicknesses. Thin films, static-prone plastics and heavy board each need their own settings and sometimes a different feeder type.

### Press speed

The feeder must keep up with the press and the stacker with the dryer. Give the press output per hour so the handling is sized for it.

### Floor length

A press with feeder, dryer and stacker is a long line. Measure the floor and the route in before choosing the configuration.

### Where the time goes now

Watch the line for a shift. If the operator spends more time loading and unloading than the press spends printing, a feeder or a stacker is the first thing to add.

## Sheet feeders

Pile feeders that separate and feed sheets to the press in register, so the press runs without an operator loading.

All 13 models →

- [**Lingtie LTC-400B**](https://www.sunstargraphics.com/machines/lingtie-ltc-400b/): Simple unwinder, which can work together with all roll to roll screen printing machines.
- [**Lingtie LTC-600B2**](https://www.sunstargraphics.com/machines/lingtie-ltc-600b2/): Simple unwinder, which can be combined with various kinds of equipment for feeding material forward.

- [**Lingtie LTC-900D**](https://www.sunstargraphics.com/machines/lingtie-ltc-900d/): All kind of Feeding Machine in Lingtie are OEM Producing model according to your requests; it can use with the printing machine, roll to sheet cutting machine.
- [**Lingtie LTE-500**](https://www.sunstargraphics.com/machines/lingtie-lte-500/): This kind of Recoiler Machine could go with many different types of machines such as the roll to roll screen printing machine, packaging machine and curing oven.

[All 13 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=handling&q=feeder)

## Stackers and take-off units

Units that lift dried sheets off the conveyor and stack them square, so nobody handles the print.

- [**SPS AUTOSTACK AS57**](https://www.sunstargraphics.com/machines/sps-autostack-as57/): Automatic sheet stacker for in-line screen printing operation, normally placed directly behind a conveyor drying system and capable of perfect stacking at extreme high speeds.
- [**SPS AUTOSTACK AS71**](https://www.sunstargraphics.com/machines/sps-autostack-as71/): Automatic sheet stacker for in-line screen printing operation, normally placed directly behind a conveyor drying system and capable of perfect stacking at extreme high speeds.

- [**SPS STK AS57/t**](https://www.sunstargraphics.com/machines/sps-stk-as57-t/): AS57/t Automatic Twin-flow Sheet Stacker, is used to work with upstream SPS High Speed Fully Automatic Twin-flow Cylinder Screen Printing Machine and Twin-flow Feeder, run synchronously linked, original unique twin/single-flow multiple mode compatible design (/t), offers double yield and adaptability to diversified print jobs, highlights German SPS's lineage classic advantages: highest ever run speed, printing accuracy, operation convenience and comfort.
- [**SPS STK AS71/t**](https://www.sunstargraphics.com/machines/sps-stk-as71-t/): AS71/t Automatic Twin-flow Sheet Stacker, is used to work with upstream SPS High Speed Fully Automatic Twin-flow Cylinder Screen Printing Machine and Twin-flow Feeder, run synchronously linked, original unique twin/single-flow multiple mode compatible design (/t), offers double yield and adaptability to diversified print jobs, highlights German SPS's lineage classic advantages: highest ever run speed, printing accuracy, operation convenience and comfort.

## Cutters and converting

Sheeters, slitters and rewinders that cut or rewind printed material to the finished size.

All 6 models →

- [**Lingtie LTG-360**](https://www.sunstargraphics.com/machines/lingtie-ltg-360/): This printed paper roll to sheet cutting machine belongs to the post-press printing equipment, match with an ancillary apparatus like rewinding machine using.
- [**Lingtie LTG-500**](https://www.sunstargraphics.com/machines/lingtie-ltg-500/): Automatic Roll to Sheet Cutting Machine widely used in Apparel, Beverage, Chemical, Commodity, Machinery, Hardware, Medical.

- [**Lingtie LTG-600**](https://www.sunstargraphics.com/machines/lingtie-ltg-600/): Roll to Sheet Cutting Machine, the cutter for cutting labels or roll material up to a width of 600 mm.
- [**Lingtie ZLG-500B**](https://www.sunstargraphics.com/machines/lingtie-zlg-500b/): Automatic Roll to sheet Punching cutting Machine with two punching heads, cutting the roll material into pieces while punching.

[All 6 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=handling&q=cutter)

## Other handling

Conveyors, turnover units and loading tables that connect the press to the rest of the line.

All 26 models →

- [**Lingtie LTC-450B**](https://www.sunstargraphics.com/machines/lingtie-ltc-450b/): Vertical rewinder machine with webguide, meter counter, tension control.
- [**Lingtie LTD-400B**](https://www.sunstargraphics.com/machines/lingtie-ltd-400b/): Rewinder with infrared induction meter; this is more accurate in identifying special materials.

- [**Lingtie LTD-450A**](https://www.sunstargraphics.com/machines/lingtie-ltd-450a/): The simple rewinding machine with only rewinding function with tension control system.
- [**Lingtie LTD-450B**](https://www.sunstargraphics.com/machines/lingtie-ltd-450b/): Rewinding with thermal transfer printing function, it can print date, code, serial number, etc. on label or material in roll form.

[All 26 models in the catalogue →](https://www.sunstargraphics.com/machines/?cat=handling&q=other)

## Machine types in this category

Each page explains one class of machine and lists its models.

- [Feeder, press, dryer and stacker specified together as one line](https://www.sunstargraphics.com/automatic-screen-printing-line/): An automatic screen printing line joins the machines around the press so that sheets move through without being carried by hand.

## Guides

Written for the person choosing the machine.

All guides →

- [Flatbed vs cylinder screen printing machine](https://www.sunstargraphics.com/guides/flatbed-vs-cylinder-screen-printing-machine/): Choose a flatbed if you print rigid or thick material, or mixed jobs in short and medium runs at around 500 sheets an hour. Choose a stop-cylinder press if you print thin flexible sheets in long runs and need 1,800 to 4,000 sheets an hour. Many plants run both.
- [Semi-automatic vs fully automatic screen printing machine](https://www.sunstargraphics.com/guides/semi-automatic-vs-fully-automatic-screen-printing-machine/): A semi-automatic screen printing machine prints by itself, but an operator loads and removes each sheet. A fully automatic machine also feeds, registers and delivers the sheet to the dryer. Semi-automatic suits short runs and many job changes. Fully automatic suits steady volume, where output and consistency repay the higher cost.

- [How to choose an industrial screen printing machine](https://www.sunstargraphics.com/guides/how-to-choose-industrial-screen-printing-machine/): Five facts about your job decide the machine: the material and its thickness, the print size, the output you need per hour, the register tolerance and the ink. With these in hand, the choice between a flatbed, a cylinder press, a roll-to-roll press or a purpose-built printer is usually clear.
- [Imported vs Indian screen printing machine](https://www.sunstargraphics.com/guides/imported-vs-indian-screen-printing-machine/): A lower-cost Indian-made screen printing machine is a sensible choice for simple graphics, wide tolerances, short runs and a tight budget. A precision imported press earns its cost on multi-layer and functional work, tight register and high volume, where rejects are expensive. The tolerance of your part and the cost of a rejected sheet decide it.

- [Screen printing vs digital printing for industrial parts](https://www.sunstargraphics.com/guides/screen-printing-vs-digital-printing-industrial/): Screen printing is the better process for volume production, for thick or opaque ink films and for functional inks such as silver, carbon and glass enamel. Digital printing is better for short runs, many design versions and variable data. It is common to use digital for samples and screen printing for production.
- [How membrane switches are made](https://www.sunstargraphics.com/guides/how-membrane-switches-are-made/): A membrane switch is made by screen printing a graphic overlay and one or two circuit layers on plastic film, then cutting them and laminating them with a spacer and adhesive. The circuit is printed in silver and carbon ink, with a dielectric layer for insulation. Each printed layer is dried or cured before the next, and each has to register to the others.

Other categories: [Printers](https://www.sunstargraphics.com/printers/), [Pre-press and screen making](https://www.sunstargraphics.com/pre-press/), [Dryers and curing](https://www.sunstargraphics.com/dryers/), [Squeegees and tools](https://www.sunstargraphics.com/squeegees/). See the [process stage by stage](https://www.sunstargraphics.com/process/) or [start from what you print](https://www.sunstargraphics.com/applications/).

## From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →

### VITESSA XP57: Print. Dry. Stack.

Printing is only half the process. The SPS VITESSA XP57 primeline takes production further with an inline drying workflowmoving sheets continuously from printing to…

## Questions buyers ask

**What is an automatic screen printing line?**

A press with a feeder in front, a conveyor dryer behind and a stacker at the end, so sheets are fed, printed, dried and stacked without being handled.

**Can a feeder and stacker be added to an existing press?**

Often, yes, if the press was built for it and there is floor space. Send the press model and Sunstar will confirm what fits.

**How many sheets per hour can an automatic line run?**

An automatic flatbed line runs faster than the 500 sheets an hour of a semi-automatic press; a stop-cylinder line runs 1,800 to 4,000 an hour, dryer and stacker included.

**Does Sunstar supply converting equipment?**

Sunstar supplies cutters and converting units with the lines it installs. Send an enquiry with the material and finished size.

## Tell Sunstar what you print.

An engineer replies within one working day with the right type and model, and Indian pricing. Delivered and installed anywhere in India.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
