---
title: Emulsion Thickness (EOM) in Screen Coating: A Practical Guide
url: https://www.sunstargraphics.com/guides/emulsion-thickness-eom-screen-coating/
description: Emulsion thickness (EOM) explained: typical values, Rz, how screen coating sets them, and automatic screen coating machines supplied by Sunstar in India.
last_updated: 2026-11-17
---

# Emulsion thickness on the screen: EOM, Rz and how screen coating controls them

EOM, or emulsion over mesh, is the thickness of emulsion that stands beyond the mesh on the print side of the screen. For fine lines and halftones it is typically 3 to 8 microns, or about 10 to 20 percent of the mesh thickness. EOM is set by how the screen is coated: the number of coats, the side they are applied from, the coating speed and the trough.

## What EOM and Rz mean

A coated screen has emulsion inside the mesh openings and a thin layer beyond the threads on the print side, the side that faces the substrate. That extra layer is the EOM. Measure the dry stencil with a thickness gauge and subtract the thickness of the bare mesh. The difference is the EOM.

Rz is the roughness of the stencil surface on the print side. A smooth surface seals against the substrate like a gasket, so ink cannot creep sideways. A rough surface follows the mesh threads and prints a sawtooth edge.

## Typical EOM by type of work

These are typical values. The emulsion maker's data sheet gives coating sequences for each mesh, and the ink maker's data sheet gives the film thickness to aim for.

| Work | Typical EOM |
|---|---|
| Halftones and fine lines | 3 to 8 microns, about 10 to 20 percent of mesh thickness |
| General line work and solids | 8 to 15 microns |
| Conductive tracks and dielectric | Set from the dry film the paste needs, commonly 10 to 25 microns |
| High-build work: textured UV, braille, gasket beads | 50 microns to several hundred, with thick-film emulsion or capillary film |

## Too little and too much

In large solid areas the mesh sets most of the deposit. EOM matters most at edges, lines and dots.

- Too little EOM: sawtooth edges, ink bleeding under the stencil, short stencil life.
- Too much EOM: heavy deposit at line edges, fine lines and dots that do not release, longer exposure and a risk of under-exposure.
- Uneven EOM across the screen: deposit and colour vary from one side of the print to the other.

## How screen coating controls EOM

Emulsion is applied wet-on-wet with a coating trough. Coats from the print side fill the mesh. Coats from the squeegee side push emulsion through and build the layer on the print side. The screen is then dried horizontally with the print side down. Extra face coats on the dried print side lower the Rz.

The result changes with coating speed, trough angle, trough pressure, the radius of the trough edge, the solids content of the emulsion and the mesh count. With hand coating these change from operator to operator. An automatic screen coating machine, also called an emulsion coating machine, coats at a set speed and pressure with a set number of coats on each side. A thicker stencil needs more exposure, so run an exposure step test whenever the coating recipe changes.

## Screen coating machines Sunstar supplies

Sunstar Graphics supplies Grünig screen coating machines from Switzerland in India. The G-COAT 414 is an automatic coating machine. The G-COAT 406 and G-COAT 404 are further coating machines in the range, and the G-COAT 401 is a coating trough. Grünig coaters apply emulsion to a repeatable thickness. ATMA offers the C 1012 / C 1016 screen coating machine, and the Grünig G 551 and G 571 stencil dryers dry the coated screen.

Send an enquiry with your frame sizes and screens per day for machine options and Indian pricing.

## Machines for this

Supplied in India by Sunstar.

- [**Grünig G-COAT 414**](https://www.sunstargraphics.com/machines/grunig-g-coat-414/): G-COAT 414 – the economical and flexible coating machine for screen sizes of up to 2 x 2 meters.
- [**Grünig G-COAT 406**](https://www.sunstargraphics.com/machines/grunig-g-coat-406/): G-COAT 406 - the attractive solution for automatic double-sided screen coating.

- [**Grünig G-DRY 551**](https://www.sunstargraphics.com/machines/grunig-g-551/): The G-DRY 551 is a horizontal drying cabinet with individual drawers and a work surface with optional luminous LED surface.
- [**ATMA C 1012 / C 1016**](https://www.sunstargraphics.com/machines/atma-c-1012-c-1016/): Screen coating machine.

## Short answers

**What is EOM in screen printing?**

EOM means emulsion over mesh. It is the thickness of the emulsion layer beyond the mesh on the print side of the screen, measured in microns.

**How is EOM measured?**

Measure the dry stencil with a screen thickness gauge and subtract the thickness of the bare mesh. Take readings at several points across the screen.

**How many coats of emulsion does a screen need?**

It depends on the mesh, the emulsion and the EOM you want. A common start is two coats from the print side followed by two or more from the squeegee side, then a thickness check.

**Does an automatic coating machine give a more even emulsion thickness?**

Yes. It repeats the same speed, pressure and number of coats on every screen, which removes operator variation.

### Ask an engineer

Tell Sunstar what you print. An engineer replies within one working day with machine options and Indian pricing.

Screen coating machines

8 models

Solar cells and PV glass

Glass and solar

Nameplates and metal labels

Labels, nameplates and packaging

Spot UV and special effects

Labels, nameplates and packaging

Gaskets

Automotive

All applications →

Screen tension in N/cm

Guide

CTS vs film positives

Guide

Screen printing defects

Guide

All guides →

## From Sunstar Academy

Real footage and short lessons from Sunstar's own channel.

All videos →

### More Ink is not Better Print | The Truth About Ink Deposit

More ink doesn’t always mean a better print.

## Tell Sunstar what you print.

An engineer replies within one working day with machine options and Indian pricing.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
