---
title: CTS vs Film Positives: Computer to Screen Imaging Compared
url: https://www.sunstargraphics.com/guides/cts-vs-film-positives/
description: CTS vs film positives for screen making: steps, cost, register and fine detail compared, and SignTronic computer to screen machines supplied in India.
last_updated: 2026-11-17
---

# Computer to screen (CTS) vs film positives for screen making

With film positives, the artwork is output on film, laid on the coated screen in a vacuum frame and exposed. Computer to screen (CTS) writes the artwork onto the coated screen with UV light, straight from the file. CTS removes the film, the vacuum frame and manual positioning. Film remains workable for a screen room that makes only a few simple screens a week.

## CTS and film positives compared

| Point | Film positives | CTS |
|---|---|---|
| Steps | Output film, check it, tape it to the screen, draw vacuum, expose | Load the screen, send the file |
| Consumables | Film for every colour of every job | No film |
| Image position | Set by hand each time | Same position on every screen, taken from the file |
| Fine detail | Depends on film density and contact. Light can creep under the film edge | No film or glass between the light and the emulsion |
| Dust | Dust on film or glass prints as pinholes | Fewer surfaces to keep clean |
| Size | Film changes size with heat and humidity | The file does not change size |
| Repeat jobs | Films are filed and found again | Files are stored on the computer |
| Investment | Low | Higher. Recovered through film, labour and setup time |

## Where CTS pays for itself

Because every image sits in the same place on the frame, the press operator spends less time moving screens into register. On multicolour work this setup saving is often larger than the film saving.

To judge the payback, count the screens made each month, the film cost for each screen, the screens remade because of film faults and the minutes spent registering each screen on the press. Set that monthly saving against the quotation for the machine.

- The screen room makes many screens a day.
- Jobs have many colours that must register, such as dials and membrane switches.
- The work includes fine lines or halftones.
- Artwork changes often, or screens are remade often.
- Frames are large, so film is costly and hard to hold in contact.

## Where film positives are still enough

A shop that makes a few screens a week with bold line work can stay with film and a UV exposing unit. The capital cost is low and the method is familiar. Keep films flat, clean and in a room with steady temperature and humidity. Check the vacuum blanket and the glass often. Mark register targets on every film so the operator can place each one in the same position on the frame.

## What CTS leaves unchanged

CTS replaces the film and the exposure step. The screen still has to be stretched to the right tension, degreased, coated to an even thickness, washed out and dried. A badly coated screen gives a poor stencil on any exposure system. The emulsion must also suit the light source of the CTS unit, so confirm the grade with the emulsion maker. Direct to screen and DTS are other names buyers use for the same method.

## CTS machines Sunstar supplies

Sunstar Graphics supplies SignTronic StencilMaster computer-to-screen systems from Switzerland in India. They image the stencil directly with UV light from the file, with no film positives and no vacuum frame. The STM-ONE is the computer-to-screen imaging system, the STM MICRO is for fine-line work, and the STM-TEX series is for textile screens. For screen rooms that stay with film, the ATMA A411 is a UV exposing unit.

Send an enquiry with your frame sizes, screens per day and finest line width for machine options and Indian pricing.

## Machines for this

Supplied in India by Sunstar.

- [**SignTronic STM-ONE**](https://www.sunstargraphics.com/machines/signtronic-stm-one/): Compact CtS system for small to medium stencil volumes with an attractive entry price.
- [**SignTronic STM-MICRO**](https://www.sunstargraphics.com/machines/signtronic-stm-micro/): Compact solution for small formats with optimized handling and high imaging quality.

- [**SignTronic STM-TEX-SERIES**](https://www.sunstargraphics.com/machines/signtronic-stm-tex-series/): CtS systems for textile applications in multiple machine sizes and formats.
- [**ATMA A411**](https://www.sunstargraphics.com/machines/atma-a411-4860a/): For exposure-transfering artwork image on positive film to photosensitive emulsion layter coated on a screen.

## Short answers

**What is CTS in screen printing?**

CTS means computer to screen. The machine exposes the artwork onto the coated screen directly from the digital file, without a film positive.

**Is CTS better than film positives?**

For multicolour, fine-line or high-volume screen making, yes, because it removes film, film dust and manual positioning. For a few simple screens a week, film is still adequate.

**Does CTS need special emulsion?**

The emulsion must be sensitive to the wavelength of the CTS light source. Check the emulsion maker's data sheet for grades suited to direct exposure.

**Who supplies CTS machines in India?**

Sunstar Graphics, Mumbai, supplies SignTronic StencilMaster computer-to-screen systems in India, with installation, training and service.

### Ask an engineer

Tell Sunstar what you print. An engineer replies within one working day with machine options and Indian pricing.

Computer-to-screen (CTS) machines

4 models

Screen coating machines

8 models

Dials and clusters

Automotive

Membrane switches and overlays

Electronics

Heat-transfer labels

Textile

Glucose test strips

Medical and diagnostics

All applications →

Emulsion thickness (EOM)

Guide

Registration problems in multicolour printing

Guide

Fine-line screen printing on polycarbonate

Guide

All guides →

## Tell Sunstar what you print.

An engineer replies within one working day with machine options and Indian pricing.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
