---
title: Screen Printing Glossary | 108 Terms Explained | Sunstar
url: https://www.sunstargraphics.com/glossary/
description: Screen printing terms in plain words: off-contact, EOM, mesh count, squeegee durometer, CTS, stop-cylinder, UV dose and more.
last_updated: 2026-11-17
---

# Screen printing glossary: 108 terms in plain words

The words used on quotations, tech sheets and the shop floor, each explained in a line or two.

## A

- AMC (annual maintenance contract) also: annual maintenance contract, service contract: A yearly agreement under which the supplier maintains a machine for an agreed fee. Sunstar arranges an AMC case by case, so ask for it in the enquiry. [Read more →](https://www.sunstargraphics.com/service-spares-amc/)
- Automatic screen printing line also: automatic line, inline screen printing line, turnkey line: A press joined to a feeder, a dryer and a stacker, so that sheets run from stack to stack without hand loading. [Read more →](https://www.sunstargraphics.com/automatic-screen-printing-line/)

## B

- Bleeding also: ink bleed, ink spreading: Ink spreading past the edge of the printed image. Common causes are thin ink, too much squeegee pressure and too little off-contact. [Read more →](https://www.sunstargraphics.com/guides/screen-printing-defects-troubleshooting/)
- Busbar also: bus bar: A wide printed conductor that collects current from fine printed lines. It is found on the heated rear window of a car and on a solar cell. [Read more →](https://www.sunstargraphics.com/applications/architectural-automotive-glass-printing-machine/)

## C

- Capillary film also: capillary stencil film, capillary emulsion film: A ready-made film of emulsion with a fixed thickness that is applied to the wet mesh. It gives a known stencil thickness and a smooth print side. [Read more →](https://www.sunstargraphics.com/guides/emulsion-thickness-eom-screen-coating/)
- Carbon paste also: carbon ink, conductive carbon: A conductive ink filled with carbon particles. It is printed as switch contacts, as a protective layer over silver tracks and as the working electrode on test strips. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- CCD registration also: CCD camera alignment, vision alignment, optical registration, auto registration: A camera reads printed marks on the sheet or web, and the machine moves the table or the screen into line before each print. [Read more →](https://www.sunstargraphics.com/ccd-registration-screen-printing-machine/)
- Ceramic ink also: glass enamel, frit ink, glass colour: A glass printing ink made of pigment and glass frit. It is fired at high temperature, usually in the toughening furnace, and fuses into the glass surface. [Read more →](https://www.sunstargraphics.com/applications/appliance-glass-screen-printing-machine/)
- Clamshell also: clam shell, hinged frame: A press on which the screen frame is hinged at the back and opens at an angle, like a lid. It is common on small and entry-level machines. [Read more →](https://www.sunstargraphics.com/flatbed-screen-printing-machine/)
- Commissioning also: installation and commissioning, I&C: Setting up a newly installed machine, running it on the buyer's job and handing it over ready for production. [Read more →](https://www.sunstargraphics.com/service-spares-amc/)
- Conductive ink also: conductive paste, silver ink, functional ink: An ink that carries electric current once it is dry, usually filled with silver or carbon. It is used for membrane switch circuits, printed sensors, heaters and test strips. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Conveyor dryer also: belt dryer, tunnel dryer, tunnel oven, drier: A dryer with a moving belt that carries printed sheets through heat or UV light. It stands directly after the press. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)
- CTS (computer to screen) also: computer-to-screen, direct to screen, DTS, digital screen imaging: A machine that writes the artwork onto the coated screen with UV light, straight from the computer file. No film positive is used. [Read more →](https://www.sunstargraphics.com/computer-to-screen-cts-machine/)

## D

- Decal also: sticker, vehicle graphics, tank sticker: A printed self-adhesive graphic, such as the tank and body graphics on a two-wheeler. Decals are screen printed in several colours, often with a clear coat on top. [Read more →](https://www.sunstargraphics.com/applications/vehicle-decal-printing-machine/)
- Decoating also: stripping, stencil removal: Removing the old emulsion stencil from the mesh with a stripping chemical, so that the screen can be coated again. [Read more →](https://www.sunstargraphics.com/screen-washing-machine/)
- Degreasing also: mesh degreasing, mesh preparation: Washing the mesh with a degreaser before coating. A clean mesh lets the emulsion stick evenly and reduces pinholes. [Read more →](https://www.sunstargraphics.com/screen-washing-machine/)
- Dielectric ink also: insulation ink, insulating ink, crossover dielectric: An insulating ink printed over conductive tracks. It protects the tracks and lets a second track cross the first without a short circuit. [Read more →](https://www.sunstargraphics.com/guides/how-membrane-switches-are-made/)
- Dot gain also: tone gain: Halftone dots printing larger than they are on the stencil, which makes the image darker. Ink flow, squeegee pressure and stencil thickness all affect it. [Read more →](https://www.sunstargraphics.com/guides/screen-printing-defects-troubleshooting/)
- Dual-cure emulsion also: diazo-photopolymer emulsion, dual cure: An emulsion that hardens through two light-sensitive systems, diazo and photopolymer. It resists both solvent-based and water-based inks. [Read more →](https://www.sunstargraphics.com/guides/emulsion-thickness-eom-screen-coating/)
- Durometer also: shore hardness, squeegee hardness, Shore A: The hardness of a squeegee blade, measured in Shore A. Typical blades are between 60 and 90 Shore A. Softer blades leave more ink and harder blades print sharper detail. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Dwell time also: drying time, residence time: The time a printed sheet spends inside the heated or lit zone of a dryer. Belt speed and tunnel length set it. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)

## E

- Emulsion also: photo emulsion, direct emulsion, screen emulsion: A light-sensitive coating applied to the mesh. It hardens where UV light exposes it. The unexposed image area washes out with water and leaves the mesh open. [Read more →](https://www.sunstargraphics.com/screen-coating-machine/)
- EOM (emulsion over mesh) also: emulsion over mesh, emulsion thickness, emulsion build-up: The thickness of the emulsion that stands above the mesh on the print side, in microns. It affects ink deposit and edge sharpness. [Read more →](https://www.sunstargraphics.com/guides/emulsion-thickness-eom-screen-coating/)
- Exclusive distributor also: sole agent, authorised distributor, dealer: The one company a manufacturer appoints to sell and support its machines in a country. Sunstar Graphics is the exclusive distributor in India for ATMA, SPS, Grünig, SignTronic, RKS, Lingtie and Luen Cheong. [Read more →](https://www.sunstargraphics.com/screen-printing-machine-supplier-india/)
- Exposure unit also: exposing unit, UV exposure unit, vacuum frame: A UV light source that exposes the coated screen through a film positive. A vacuum frame usually holds the film and the screen in tight contact. [Read more →](https://www.sunstargraphics.com/process/pre-press-screen-making/)

## F

- Feeder also: auto feeder, sheet feeder: The unit that picks sheets from a stack and places them on the press in register, so that no operator has to load by hand. [Read more →](https://www.sunstargraphics.com/automatic-screen-printing-machine/)
- Film positive also: film, positive, photo positive: A clear film that carries the artwork in opaque black. It is laid on the coated screen during exposure so that the image area stays soft and washes out. [Read more →](https://www.sunstargraphics.com/guides/cts-vs-film-positives/)
- Fine line also: fine line printing, fine-line screen printing: Printing narrow lines and gaps cleanly. In dial and printed electronics work this typically means lines of about 100 to 150 microns or narrower. The limit depends on the mesh, stencil, ink and press. [Read more →](https://www.sunstargraphics.com/guides/fine-line-screen-printing-polycarbonate/)
- Flatbed screen printing machine also: flat bed, flat-bed, flat screen printing machine: A press that holds the sheet flat on a vacuum table while the squeegee travels across the screen. It prints rigid and flexible sheets. [Read more →](https://www.sunstargraphics.com/flatbed-screen-printing-machine/)
- Flood bar also: flood coater, flood blade, flood stroke: A metal blade that spreads ink back across the screen and fills the mesh openings before the print stroke. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Four-post lift also: vertical lift, parallel lift, four post, 4 pillar: A print head that lifts the screen frame straight up on four columns, so the frame stays parallel to the table. It is also called vertical lift or parallel lift. [Read more →](https://www.sunstargraphics.com/flatbed-screen-printing-machine/)
- FPC (flexible printed circuit) also: flexible printed circuit, flex PCB, flexible PCB, flex circuit: A circuit made on thin flexible film such as polyimide or PET. Screen printing applies conductive tracks, coverlay and solder mask to it. [Read more →](https://www.sunstargraphics.com/applications/flexible-pcb-screen-printing-machine/)
- Frame also: screen frame, aluminium frame, printing frame: The rectangular frame, usually aluminium, that the mesh is stretched over and glued to. [Read more →](https://www.sunstargraphics.com/screen-stretching-machine/)
- Fully automatic screen printing machine also: automatic screen printing machine, full auto, fully automatic screen printer: A press that feeds, prints and delivers sheets on its own. The operator loads the stack and checks the print. [Read more →](https://www.sunstargraphics.com/automatic-screen-printing-machine/)

## G

- Ghost image also: haze, ghost haze, mesh stain: A faint stain of the previous job left in the mesh after decoating. It is removed with a haze remover. [Read more →](https://www.sunstargraphics.com/screen-washing-machine/)
- Glucose test strip also: blood glucose strip, sugar test strip, biosensor strip, diagnostic strip: A disposable strip that measures blood sugar. Its electrodes are screen printed in carbon, silver and silver/silver chloride pastes on plastic film. [Read more →](https://www.sunstargraphics.com/applications/glucose-test-strip-printing-machine/)
- Graphic overlay also: fascia, facia, front panel, keypad overlay: The printed top layer of a control panel or membrane keypad. It is usually polyester or polycarbonate film printed on the reverse side. [Read more →](https://www.sunstargraphics.com/applications/membrane-switch-screen-printing-machine/)

## H

- Halftone also: halftone dot, tonal printing: A way of printing tones with dots of different sizes. From a normal viewing distance the dots read as light and dark shades. [Read more →](https://www.sunstargraphics.com/computer-to-screen-cts-machine/)
- Heat transfer label also: tagless label, neck label, plastisol transfer, textile transfer: A label screen printed in reverse on release paper or film, then pressed onto a garment with heat. It replaces a sewn-in neck label. [Read more →](https://www.sunstargraphics.com/applications/heat-transfer-label-printing-machine/)
- HMI also: human-machine interface, touch screen, operator panel: The touch screen on the machine where the operator sets speeds, strokes and positions and saves them as a job. HMI stands for human-machine interface. [Read more →](https://www.sunstargraphics.com/automatic-screen-printing-machine/)

## I

- IMD (in-mould decoration) also: in-mould decoration, in-mold decoration, film insert moulding, FIM: A screen printed film is formed to shape and placed in the injection mould, so the graphic ends up inside the finished plastic part. [Read more →](https://www.sunstargraphics.com/applications/imd-in-mould-decoration-printing-machine/)
- Impressions per hour (IPH) also: IPH, cycles per hour, sheets per hour: The number of prints a machine makes in one hour. Makers state the top mechanical speed. Real output depends on the job, the ink and the operator. [Read more →](https://www.sunstargraphics.com/guides/semi-automatic-vs-fully-automatic-screen-printing-machine/)
- Ink deposit also: ink film thickness, deposit thickness: The thickness of ink left on the substrate by one print. Mesh, stencil thickness and the squeegee's hardness, angle and speed set it. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- IR dryer also: infrared dryer, hot air dryer, IR tunnel, jet air dryer: A conveyor dryer that heats the ink with infrared lamps, usually together with hot air that carries the solvent away. It is used for solvent, water-based and plastisol inks. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)

## L

- Landed cost also: landed price: The full cost of an imported machine by the time it reaches the buyer's factory: machine price, freight, insurance, customs duty and taxes. [Read more →](https://www.sunstargraphics.com/screen-printing-machine-price-india/)
- LED UV curing also: UV LED curing, LED UV dryer: UV curing with LED lamps in place of mercury lamps. LEDs emit a narrow band of UV and run cooler, and the ink has to be made for LED curing. [Read more →](https://www.sunstargraphics.com/uv-curing-machine-screen-printing/)
- Legend printing also: legend ink, marking ink, component marking, PCB silk screen: Printing the white letters, numbers and component outlines on a circuit board. [Read more →](https://www.sunstargraphics.com/applications/pcb-screen-printing-machine/)
- Line and space also: L/S, line width, track and gap: The width of a printed line and of the gap next to it, written for example as 100/100 microns. It states how fine a circuit pattern is. [Read more →](https://www.sunstargraphics.com/guides/fine-line-screen-printing-polycarbonate/)

## M

- Membrane switch also: membrane keypad, membrane keyboard, dome switch: A thin keypad made of printed layers of film. A printed overlay sits on top. Silver and carbon circuits underneath close when a key is pressed. [Read more →](https://www.sunstargraphics.com/applications/membrane-switch-screen-printing-machine/)
- Mesh also: screen mesh, polyester mesh, bolting cloth, screen fabric: The woven fabric stretched on the frame. Most mesh is polyester. Stainless steel mesh is used for very fine work and for heavy paste deposits. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Mesh count also: threads per cm, threads per inch, TPI, mesh number: The number of threads per centimetre or per inch. A higher count prints finer detail and a thinner ink film. A lower count lays down more ink. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Mesh opening also: aperture, mesh aperture: The gap between two neighbouring threads, in microns. Particles in the ink or paste have to pass through it, so check the largest particle size on the ink maker's data sheet. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Misregistration also: out of register, misregister, registration error: One colour or layer printing out of position against another. It shows as gaps, overlaps or blurred edges. [Read more →](https://www.sunstargraphics.com/guides/registration-problems-multicolour-screen-printing/)
- Moiré also: moire, moire pattern: An unwanted wavy or chequered pattern that appears when rows of halftone dots clash with the mesh threads. [Read more →](https://www.sunstargraphics.com/guides/screen-printing-defects-troubleshooting/)

## N

- N/cm also: newton per centimetre, newton, N/cm tension: Newton per centimetre, the unit of screen tension. A tension meter placed on the mesh reads it directly. [Read more →](https://www.sunstargraphics.com/guides/screen-tension-ncm-guide/)
- Nameplate also: name plate, metal label, rating plate, machine plate: A printed plate that carries a logo, rating or serial data on a machine or appliance. It is screen printed on aluminium, stainless steel or plastic. [Read more →](https://www.sunstargraphics.com/applications/nameplate-screen-printing-machine/)

## O

- Off-contact also: snap-off, off-contact distance, screen gap: The gap between the underside of the screen and the substrate before the squeegee presses the mesh down. It lets the mesh lift off the print just behind the squeegee. [Read more →](https://www.sunstargraphics.com/guides/off-contact-snap-off-screen-printing/)

## P

- Peel-off also: peel, lift-off, screen peel: A press function that raises the screen frame behind the squeegee as the stroke moves forward. It helps the mesh release from the ink on large prints and with sticky inks. [Read more →](https://www.sunstargraphics.com/guides/off-contact-snap-off-screen-printing/)
- Pin registration also: register pins, pin system: Locating the sheet, the film or the screen on fixed pins through punched holes, so that each one sits in the same position every time. [Read more →](https://www.sunstargraphics.com/guides/registration-problems-multicolour-screen-printing/)
- Pinholes also: pin holes, pinholing: Small unwanted open spots in the stencil that print as dots. Dust, poor degreasing and under-exposure cause them. [Read more →](https://www.sunstargraphics.com/guides/screen-printing-defects-troubleshooting/)
- Plastisol also: plastisol ink, PVC ink: A PVC-based ink that stays wet until it is heated. It cures at the temperature given on the ink maker's data sheet and is used for textile transfers. [Read more →](https://www.sunstargraphics.com/applications/heat-transfer-label-printing-machine/)
- Polycarbonate also: PC, PC film, Lexan: A clear, tough plastic supplied as film and sheet. It is the usual material for dials, graphic overlays and nameplates. [Read more →](https://www.sunstargraphics.com/guides/fine-line-screen-printing-polycarbonate/)
- Pre-press also: screen making, screen room, stencil making, screen preparation: All the work of making the screen before printing: stretching, coating, imaging, washing out and drying. [Read more →](https://www.sunstargraphics.com/process/pre-press-screen-making/)
- Print area also: maximum print size, print size, printing area: The largest image a machine can print. It is smaller than the table and smaller than the screen frame. [Read more →](https://www.sunstargraphics.com/guides/how-to-choose-industrial-screen-printing-machine/)
- Print stroke also: squeegee stroke, print pass: The pass of the squeegee that pushes ink through the open mesh onto the substrate. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Printed electronics also: flexible electronics, functional printing, printed sensor: Electrical circuits and components made by printing functional inks on film, glass or paper. Examples are sensors, heaters, antennas and touch circuits. [Read more →](https://www.sunstargraphics.com/applications/printed-sensor-screen-printing-machine/)

## Q

- Quotation also: quote, price, rate, techno-commercial offer: The supplier's written offer for a named machine, with its options and terms. Sunstar quotes each machine in Indian rupees against the buyer's job. [Read more →](https://www.sunstargraphics.com/screen-printing-machine-price-india/)

## R

- Radiometer also: UV radiometer, UV meter, dose meter: An instrument that travels through the UV dryer on the belt and reads the UV dose and peak intensity that the print receives. [Read more →](https://www.sunstargraphics.com/guides/uv-ink-not-curing-uv-dose/)
- Reclaiming also: screen reclaiming, screen recycling, screen cleaning: Cleaning a used screen so that it can be coated again: ink removal, decoating, haze removal and degreasing. [Read more →](https://www.sunstargraphics.com/screen-washing-machine/)
- Registration also: register, fit, alignment: Placing each print in the correct position on the sheet, and each colour or layer in position against the one before. [Read more →](https://www.sunstargraphics.com/guides/registration-problems-multicolour-screen-printing/)
- Repeat accuracy also: repeatability, registration accuracy, tolerance: How closely a machine returns to the same print position from one print to the next. It is stated as a tolerance such as ±0.02 mm. [Read more →](https://www.sunstargraphics.com/ccd-registration-screen-printing-machine/)
- Roll-to-roll screen printing also: roll to roll, reel to reel, R2R, web-fed: Printing on a continuous web that unwinds from one reel and rewinds onto another. Curing runs in line before the rewind. [Read more →](https://www.sunstargraphics.com/roll-to-roll-screen-printing-machine/)
- Roll-to-sheet also: roll to sheet, reel to sheet, sheeter: A machine that cuts a printed reel into sheets in register with the print. [Read more →](https://www.sunstargraphics.com/lingtie-roll-to-roll-screen-printing-machine-india/)

## S

- Sawtooth edge also: saw tooth, jagged edge, stair-stepping: A stepped edge on a printed line that follows the mesh threads. It appears when the emulsion is too thin to bridge the mesh openings. [Read more →](https://www.sunstargraphics.com/guides/emulsion-thickness-eom-screen-coating/)
- Screen coating machine also: automatic coater, emulsion coating machine, coating trough, scoop coater: A machine that applies emulsion to the mesh with a coating trough at a set speed and pressure, so that every screen gets the same thickness. [Read more →](https://www.sunstargraphics.com/screen-coating-machine/)
- Screen printed electrode (SPE) also: SPE, printed electrode, electrochemical sensor: An electrode made by screen printing carbon, silver or silver/silver chloride paste onto plastic or ceramic. It is the sensing part of glucose strips and other electrochemical sensors. [Read more →](https://www.sunstargraphics.com/guides/how-glucose-test-strips-are-screen-printed/)
- Screen printing also: silk screen printing, silkscreen printing, serigraphy, screen process printing: A printing process in which a squeegee pushes ink through a mesh stencil onto the material below. It lays down a thicker ink film than most other printing processes. [Read more →](https://www.sunstargraphics.com/process/)
- Screen stretching machine also: mesh stretching machine, fabric stretching machine, pneumatic stretcher, stretching clamps: A machine that pulls the mesh to a set tension in both directions before it is glued to the frame. [Read more →](https://www.sunstargraphics.com/screen-stretching-machine/)
- Screen tension also: mesh tension, fabric tension: How tightly the mesh is stretched on the frame, measured in N/cm. Even tension keeps the off-contact gap and the registration the same across the print. [Read more →](https://www.sunstargraphics.com/guides/screen-tension-ncm-guide/)
- Screen washing machine also: screen cleaning machine, screen reclaiming machine, developing machine, washout booth: A closed machine that washes ink from screens, develops exposed screens or strips old emulsion, using sprayed water or chemicals. [Read more →](https://www.sunstargraphics.com/screen-washing-machine/)
- Semi-automatic screen printing machine also: semi automatic, semi-auto, semiautomatic screen printer: A press that makes the print stroke on its own while the operator loads and unloads each sheet by hand. [Read more →](https://www.sunstargraphics.com/semi-automatic-screen-printing-machine/)
- Sheet-fed also: sheet fed, hand-fed: A machine that prints separate sheets one at a time. Flatbed and stop-cylinder presses are sheet-fed. [Read more →](https://www.sunstargraphics.com/guides/flatbed-vs-cylinder-screen-printing-machine/)
- Silver paste also: silver ink, Ag paste, silver conductive paste: A conductive ink loaded with silver flakes. It is printed as circuit tracks on membrane switches, heaters, sensors and solar cells. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Sliding table also: shuttle table, moving table: A print table that slides out from under the screen for loading and unloading, then moves back in for the print. It suits glass and thick or heavy parts. [Read more →](https://www.sunstargraphics.com/flatbed-screen-printing-machine/)
- Solder mask also: solder resist, PISM, photoimageable solder mask: The protective coating, usually green, printed over the copper tracks of a circuit board. It leaves only the solder pads open. [Read more →](https://www.sunstargraphics.com/applications/pcb-screen-printing-machine/)
- Solvent ink also: solvent-based ink, air-dry ink: An ink that dries when its solvent evaporates. It is dried in an IR hot-air tunnel or on racks. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)
- Spot UV also: spot UV coating, raised UV, texture UV, UV varnish: A clear UV varnish screen printed only on chosen areas of a printed sheet, for gloss, texture or a raised feel. [Read more →](https://www.sunstargraphics.com/applications/spot-uv-screen-printing-machine/)
- Squeegee also: squeegee blade, squeegee rubber, polyurethane squeegee: The blade, usually polyurethane, that presses the mesh onto the substrate and pushes ink through it. [Read more →](https://www.sunstargraphics.com/squeegee-blades-and-sharpeners/)
- Squeegee angle also: blade angle, attack angle: The angle between the squeegee blade and the screen during the print stroke. A typical setting is between 60 and 80 degrees. A flatter angle leaves more ink. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Squeegee pressure also: print pressure, blade pressure: The force that pushes the squeegee down onto the screen. It should be just enough to bring the mesh into contact and wipe the stencil clean. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Squeegee sharpener also: squeegee grinder, squeegee sharpening machine: A machine that grinds the worn edge of a squeegee blade straight and sharp again. [Read more →](https://www.sunstargraphics.com/squeegee-blades-and-sharpeners/)
- Stacker also: sheet stacker, auto stacker: The unit at the end of a line that collects dried sheets into a neat pile. [Read more →](https://www.sunstargraphics.com/automatic-screen-printing-line/)
- Stainless steel mesh also: SS mesh, steel mesh, wire mesh: Mesh woven from stainless steel wire. It stretches very little and has a large open area, so it is used for fine lines and thick-film pastes. [Read more →](https://www.sunstargraphics.com/guides/mesh-count-for-conductive-ink-silver-paste/)
- Stencil also: screen stencil, photo stencil: The hardened emulsion on the mesh. It blocks ink everywhere except the open image area. [Read more →](https://www.sunstargraphics.com/process/pre-press-screen-making/)
- Stop-cylinder press also: cylinder press, stop cylinder, swing cylinder, cylinder screen printing machine: A sheet-fed press that grips a flexible sheet on a cylinder. The cylinder stops to take each sheet, then turns under the moving screen while the squeegee stays in one place. [Read more →](https://www.sunstargraphics.com/stop-cylinder-screen-printing-press/)
- Substrate also: material, stock, printing material: The material being printed, such as polycarbonate film, glass, metal sheet, a circuit board or transfer paper. [Read more →](https://www.sunstargraphics.com/guides/how-to-choose-industrial-screen-printing-machine/)

## T

- Take-off also: vacuum take-off, sheet take-off, gripper take-off: The unit that removes the printed sheet from the table and places it on the dryer belt. A vacuum take-off lifts the sheet with suction cups. [Read more →](https://www.sunstargraphics.com/guides/semi-automatic-vs-fully-automatic-screen-printing-machine/)
- Tension meter also: screen tension meter, newton meter, tensiometer: A gauge placed on the stretched mesh that reads screen tension in N/cm. [Read more →](https://www.sunstargraphics.com/guides/screen-tension-ncm-guide/)
- Thick film printing also: thick film, paste printing: Screen printing of functional pastes in layers from several microns to tens of microns thick. The term comes from electronics. [Read more →](https://www.sunstargraphics.com/applications/printed-sensor-screen-printing-machine/)
- Three-quarter automatic also: 3/4 automatic, ¾ automatic, semi-automatic with take-off: A press that the operator feeds by hand while a take-off removes each printed sheet to the dryer automatically. [Read more →](https://www.sunstargraphics.com/guides/semi-automatic-vs-fully-automatic-screen-printing-machine/)
- Toughened glass also: tempered glass, toughened safety glass: Glass that has been heated and cooled quickly to make it stronger. Ceramic ink is printed before toughening and fuses in the furnace. [Read more →](https://www.sunstargraphics.com/applications/appliance-glass-screen-printing-machine/)

## U

- UV curing machine also: UV dryer, UV conveyor, UV tunnel, UV curing system: A conveyor with UV lamps that hardens UV ink in seconds as the print passes under the light. [Read more →](https://www.sunstargraphics.com/uv-curing-machine-screen-printing/)
- UV dose also: UV energy, mJ/cm², energy density: The UV energy a print receives per unit area as it passes under the lamps, measured in mJ/cm². The ink maker's data sheet gives the dose needed for full cure. [Read more →](https://www.sunstargraphics.com/guides/uv-ink-not-curing-uv-dose/)
- UV ink also: UV curable ink, UV-curing ink: An ink that hardens under UV light in seconds. It contains little or no solvent. [Read more →](https://www.sunstargraphics.com/uv-curing-machine-screen-printing/)

## V

- Vacuum table also: vacuum bed, suction bed, honeycomb table: A print table with small holes connected to a suction blower. The suction holds the sheet flat and still during the print. [Read more →](https://www.sunstargraphics.com/flatbed-screen-printing-machine/)

## W

- Water-based ink also: water based ink, aqueous ink: An ink that uses water as its main carrier and dries by evaporation in a hot-air or IR dryer. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)
- Wet film thickness also: WFT, dry film thickness, DFT: The thickness of the ink film straight after printing, before drying. With solvent and water-based inks the dry film is thinner, because part of the ink evaporates. [Read more →](https://www.sunstargraphics.com/guides/squeegee-pressure-angle-hardness/)
- Wicket dryer also: wicket drier, wicket oven: A dryer that carries each sheet on its own wire rack through warm air. It is used for slow-drying inks and for sheets that must stay apart while they dry. [Read more →](https://www.sunstargraphics.com/ir-hot-air-conveyor-dryer/)

## Tell Sunstar what you print.

An engineer replies within one working day with machine options and Indian pricing. Delivered and installed anywhere in India.

## About Sunstar Graphics

- Company: Sunstar Graphics Pvt. Ltd., an Indian distributor of industrial screen printing machinery
- Since: 1980, founded as Sunglo India by Ajit Lalvani; Sunstar Graphics formed in 2000
- Brands: Authorised distributor in India for ATMA (Taiwan), SPS and RKS (Germany), Grünig and SignTronic (Switzerland) and Lingtie and Luen Cheong (China). It also supplies Kuroki squeegees (Taiwan).
- Supplies: printers (flatbed, stop-cylinder, roll-to-roll, glass, PCB and part printers); pre-press and screen making (stretching, coating, computer-to-screen, washing); dryers and curing (IR, hot air and UV); feeders, stackers and converting; squeegees and tools
- Services: Consultation, supply, installation, operator training, service, spares and AMC
- Area served: All of India, from the office in Worli, Mumbai
- Address: Unit B-305, Neelam Centre, S K Ahire Marg, Worli, Mumbai, Maharashtra 400030, India
- Phone: +91 98203 61705
- Email: Sales@sunstargraphics.com
- Prices: Quoted in Indian rupees for each job; not published as a list
